Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Installing an MX2008 Router Overview

To install the MX2008 router:

Prepare your installation site. See:
- Preparing the Site for the MX2008 Router Overview
Review the safety guidelines. See:
- General Safety Guidelines for Juniper Networks Devices
Unpack the router and verify the parts. See:
Install the mounting hardware. See:
- Installing the MX2008 Mounting Hardware for a Four-Post Rack or Cabinet
Remove all components. See:
- Removing Components from the MX2008 Router Chassis Before Installing It in a Rack
Install the router into the rack. See:
- Installing an MX2008 Router Using a Pallet Jack Overview
- Installing an MX2008 Router Using a Router Transport Kit Overview
Ground the router. See Grounding an MX2008 Router.

Grounding an MX2000 Router

Grounding an MX2008 Router
Reinstall all components. See:
- Reinstalling Components in the MX2008 Router After Initially Installing the Router in a Rack
Connect cables to the network and external devices. See:
- Connecting the MX2008 Router to Management and Alarm Devices.
Connect the AC power cord, DC power cables, 240 V China power cables, or the universal (HVAC/HVDC) power cables. See:
Power on the router. See:
- Powering On a Three-Phase AC-Powered MX2000 Router
Perform the initial system configuration. See:
- Initially Configuring the MX2008 Router