close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Use Juniper BNG CUPS
- Use Juniper BNG CUPS with Multiple Geographical Redundancy
- Use Dynamic Address Pools in Juniper BNG CUPS
- Juniper BNG CUPS High Availability
- Use Juniper BNG CUPS Subscriber Groups
- Use BNG User Plane Maintenance
- Use Juniper BNG CUPS Smart Session Load Balancing
- Use Juniper BNG CUPS for Subscriber Steering
- Use Juniper BNG CUPS Multicast
- Use Juniper BNG CUPS Lawful Intercept
- Use Juniper BNG CUPS Captive Portal and Content Delivery Services
- Configure Agent Circuit Identifier and IFL Sets in Juniper BNG CUPS
- Understanding DVLAN (Single/Dual tag) for Subscriber Services Scaling (Junos Evolved for ACX7100-48L, ACX7332, and ACX7348 Devices)
- How to Use the Juniper BNG CUPS Controller Utility Commands
- Troubleshooting and Monitoring Juniper BNG CUPS
- play_arrow Juniper BNG CUPS Controller CLI Configuration Statements
- play_arrow Juniper BNG CUPS Controller CLI Operational Statements
- play_arrow Juniper BNG User Plane CLI Operational Commands
list Table of Contents
keyboard_arrow_right
flexible-vlan-tagging (Interfaces)
date_range
19-Nov-23
Description
Simultaneously supports transmission of 802.1Q VLAN single-tag and dual-tag frames on logical interfaces on the same Ethernet port.
Note:
The flexible-vlan-tagging is supported only
with either no encapsulation or VPLS VLAN encapsulation.
Options
native-vlan-id—Configures a
VLAN identifier for single-tag frames, dual-tag frames, or a mixture
of single-tag and dual-tag frames.
