close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Safety and Compliance Information
- Definitions of Safety Warning Levels
- General Safety Guidelines and Warnings
- Restricted Access Warning
- Qualified Personnel Warning
- Prevention of Electrostatic Discharge Damage
- Fire Safety Requirements
- Laser and LED Safety Guidelines and Warnings
- Chassis and Component Lifting Guidelines
- Radiation from Open Port Apertures Warning
- Maintenance and Operational Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- General Electrical Safety Guidelines and Warnings
- SSR1400 Agency Approvals
- FCC and EMC Declarations
- Lithium Battery Declaration
list Table of Contents
Unmount the SSR1400 Chassis
date_range
08-Sep-22
Remove the SSR1400 from a Rack
Before removing a SSR1400 from a rack:
Here’s what you’ll need to remove the SSR1400 from a rack:
Two people. One to hold the SSR1400 while the other one removes the screws.
Screwdriver appropriate for your rack-mounting screws.
Note:
When you remove multiple devices from a rack, remove the device at the top of the rack first and proceed to remove the rest of the devices from top to bottom.
Power off the SSR1400 (see Power Off the SSR1400).
Disconnect the power cords.
Ensure that you have disconnected any cables or wires attached to the SSR1400.
To remove an SSR1400 from a rack:
- Have one person support the weight of the appliance while another person uses the screwdriver to remove the front mounting screws that attach the chassis mounting brackets to the rack.
- Remove the SSR1400 from the rack.
- Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the rear of the rack.
- Place the removed screws and rear mounting blades in a labeled bag. You will need them when you reinstall the chassis.
