Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Dissociate a Configuration Template from a Device

As an SP (Service Provider) Administrator or OpCo (Operating Company) Administrator, you can dissociate a configuration template when you no longer want the template to be associated with your device. Dissociating a configuration template removes references to the configuration template from the device but does not remove the configuration pushed to the device.

To remove the configuration pushed to the device, you must undeploy the configuration template. See Undeploy a Configuration Template from a Device for details.

To dissociate a configuration template:

  1. Do one of the following:

    • Select Resources > Provider Hub Devices.

      The Provider Hub Devices page appears.

    • Select Resources > Tenant Devices.

      The Tenant Devices page appears.

  2. Click the Device-Name link for the device from which you want to dissociate the configuration template.

    The Device-Name page appears.

  3. From the Configuration Template tab, select the configuration template that you want to dissociate from the device and click Dissociate.

    An alert message appears, asking you to confirm the dissociate operation.

  4. Click Yes.

    If the dissociation is successful, a confirmation message appears, indicating that the references to the configuration template were removed from the device.

    If the dissociation fails, repeat the procedure to dissociate the configuration template.