Configure Hybrid Mode with Mapping of the PTP Clock Class to the ESMC Quality-Level

Read this topic to configure hybrid mode with mapping the PTP clock class to ESMC quality level.

1. In configuration mode, go to the [edit protocols ptp slave] hierarchy level:
   content_copy zoom_out_map

   [edit]
   user@host# edit protocols ptp slave
   

2. Configure the convert-clock-class-to-quality-level option to set the default mapping between the ESMC SSM quality level and the PTP clock class.
   content_copy zoom_out_map

   [edit protocols ptp slave]
   user@host# set convert-clock-class-to-quality-level
   

3. Configure the hybrid mode option on the timeReceiver.
   content_copy zoom_out_map

   [edit protocols ptp slave]
   user@host# edit hybrid
   

4. For MX routers, perform the following steps:

   1. Configure the Synchronous Ethernet mapping option in hybrid mode.

      content_copy zoom_out_map

      [edit protocols ptp slave hybrid]
      user@host# edit synchronous-ethernet-mapping
      

   2. Configure the IP address of the clock source.

      content_copy zoom_out_map

      [edit protocols ptp slave hybrid synchronous-ethernet-mapping]
      user@host# edit clock-source ip-address
      

   3. Configure one or more Synchronous Ethernet source interfaces for the timeReceiver as needed.

      content_copy zoom_out_map

      [edit protocols ptp slave hybrid synchronous-ethernet-mapping clock-source ip-address]
      user@host# set interface interface1-name
      user@host# set interface interface2-name
      

   Note:

   You must first configure these interfaces at the [edit chassis synchronization] hierarchy level as Synchronous Ethernet sources. For information about configuring these interfaces, see synchronization (MX Series).

5. For ACX series routers, perform the following steps:

   1. Configure the upstream unicast PTP timeTransmitter interface and IP address of the clock source.

      content_copy zoom_out_map

      [edit protocols ptp slave]
      user@host# set interface interface-name clock-source ip-address
      

   2. Configure one or more Synchronous Ethernet source interfaces for the timeReceiver as needed.

      content_copy zoom_out_map

      [edit protocols ptp slave ]
      user@host# set interface interface1-name unicast-mode clock-source ip-address
      user@host# set interface interface2-name unicast-mode clock-source ip-address 
      

   Note:

   You must first configure these interfaces at the [edit chassis synchronization] hierarchy level as Synchronous Ethernet sources. For information about configuring these interfaces, see synchronization (ACX Series).