- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Remove, Install, and Maintain Components
- play_arrow Troubleshoot the Hardware
- play_arrow Contact Customer Support and Return the Chassis or Components
PTX10001-36MR Agency Approvals and Compliance Statements
PTX10001-36MR Agency Approvals
The PTX10001-36MR complies with the following standards
Electromagnetic Compatibility (EMC) Requirements
FCC 47 CFR Part 15
ICES-003 / ICES-GEN
EN 300 386 V1.6.1
EN 300 386 V2.1.1
EN 55032
CISPR 32
EN 55024
CISPR 24
EN 55035
CISPR 35
IEC/EN 61000 Series
AS/NZS CISPR 32
VCCI-CISPR 32
BSMI CNS 13438
KN 32 and KN 35
KN 61000 Series
TEC/SD/DD/EMC-221/05/OCT-16
TCVN 7189
TCVN 7317
Safety Requirements
CAN/CSA-C22.2 No. 62368-1 and 60950-1
UL 62368-1 and 60950-1
IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report
IEC 62368-3 for USB and PoE: CB Scheme report
CFR, Title 21, Chapter 1, Subchapter J, Part 1040
REDR c 1370 OR CAN/CSA-E 60825-1- Part 1
IEC 60825-1
IEC 60825-2
The PTX10001-36MR complies with the following standards:
GR-1089-Core
GR-3160-Core
Compliance Statement for Argentina
EQUIPO DE USO IDÓNEO.
Compliance Statements for EMC Requirements
Canada
CAN ICES-3 (A)/NMB-3(A)
European Community
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.
Israel
Translation from Hebrew—Warning: This product is Class A. In residential environments, the product might cause radio interference, and in such a situation, the user might be required to take adequate measures.
Japan
The preceding translates as follows:
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this product is used near a radio or television receiver in a domestic environment, it might cause radio interference. Install and use the equipment according to the instruction manual. VCCI-A.
Korea
The preceding translates as follows:
This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller or user should take notice of it, and this equipment is to be used in the places except for home.
Taiwan
The preceding translates as follows:
This is Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
United States
The hardware equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Compliance Statements for Environmental Requirements
Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product documentation includes instructional information about the proper method of reclamation and recycling.
Compliance Statements for NEBS
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I), as defined in GR-1089-CORE.
Note:PTX10001-36MR meets the NEBS GR-1089 Issue 6 requirements.
You must provision a readily accessible device outside of the equipment to disconnect power. The device must also be rated based on local electrical code practice.
