close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Understanding Contrail Controller
-
- play_arrow Installing and Upgrading Contrail
- play_arrow Supported Platforms and Server Requirements
- play_arrow Installing Contrail and Provisioning Roles
- Introduction to Containerized Contrail Modules
- Introduction to Contrail Microservices Architecture
- Downloading Installation Software
- Overview of contrail-ansible-deployer used in Contrail Command for Installing Contrail with Microservices Architecture
- Installing Contrail with OpenStack and Kolla Ansible
- Configuring the Control Node with BGP
- Contrail Global Controller
- Role and Resource-Based Access Control
- play_arrow Installation and Configuration Scenarios
- Setting Up and Using a Simple Virtual Gateway with Contrail 4.0
- Configuring MD5 Authentication for BGP Sessions
- Configuring the Data Plane Development Kit (DPDK) Integrated with Contrail vRouter
- Configuring Contrail DPDK vRouter to Run in a Docker Container
- Configuring Single Root I/O Virtualization (SR-IOV)
- Configuring Virtual Networks for Hub-and-Spoke Topology
- Configuring Transport Layer Security-Based XMPP in Contrail
- Configuring Graceful Restart and Long-lived Graceful Restart
- Remote Compute
- Dynamic Kernel Module Support (DKMS) for vRouter
- play_arrow Upgrading Contrail Software
- play_arrow Backup and Restore Contrail Software
- play_arrow Multicloud Contrail
- play_arrow Using Contrail with Kubernetes
- Contrail Integration with Kubernetes
- Installing and Managing Contrail 5.0 Microservices Architecture Using Helm Charts
- Provisioning of Kubernetes Clusters
- Using Helm Charts to Provision Multinode Contrail OpenStack Ocata with High Availability
- Using Helm Charts to Provision All-in-One Contrail with OpenStack Ocata
- Accessing a Contrail OpenStack Helm Cluster
- Frequently Asked Questions About Contrail and Helm Charts
- Contrail Deployment with Helm
- Verifying Configuration for CNI for Kubernetes
- Kubernetes Updates to IP Fabric
- Implementation of Kubernetes Network Policy with Contrail Firewall Policy
- play_arrow Using VMware vCenter with Containerized Contrail
- vCenter Integration for Contrail Release 5.0
- vCenter Integration for Contrail Release 5.0.1
- vCenter Integration for Contrail Release 5.0.2
- Underlay Network Configuration for ContrailVM
- Using the Contrail and VMware vCenter User Interfaces to Manage the Network For Contrail Releases 5.0 and 5.0.1
- Using the Contrail and VMware vCenter User Interfaces to Manage the Network For Contrail Release 5.0.2
- Integrating Contrail Release 5.0.X with VMware vRealize Orchestrator
- Installing and Provisioning Contrail VMware vRealize Orchestrator Plugin
- play_arrow Using Contrail with Red Hat
- play_arrow Contrail and AppFormix Kolla/Ocata OpenStack Deployment
- Contrail and AppFormix Deployment Requirements
- Preparing for the Installation
- Run the Playbooks
- Accessing Contrail in AppFormix Management Infrastructure in UI
- Notes and Caveats
- Example Instances.yml for Contrail and AppFormix OpenStack Deployment
- Installing AppFormix for OpenStack
- Installing AppFormix for OpenStack in HA
- play_arrow Using Contrail with Juju Charms
- play_arrow Contrail Command
- play_arrow Extending Contrail to Physical Routers, Bare Metal Servers, Switches, and Interfaces
- Understanding Bare Metal Server Management
- Configuring High Availability for the Contrail OVSDB ToR Agent
- Using Device Manager to Manage Physical Routers
- SR-IOV VF as the Physical Interface of vRouter
- Using Gateway Mode to Support Remote Instances
- REST APIs for Extending the Contrail Cluster to Physical Routers, and Physical and Logical Interfaces
- play_arrow Contrail for Data Center Automation and Fabric Management
-
- play_arrow Configuring Contrail
- play_arrow Configuring Virtual Networks
- Creating Projects in OpenStack for Configuring Tenants in Contrail
- Creating a Virtual Network with Juniper Networks Contrail
- Creating a Virtual Network with OpenStack Contrail
- Creating an Image for a Project in OpenStack Contrail
- Creating a Floating IP Address Pool
- Using Security Groups with Virtual Machines (Instances)
- Support for IPv6 Networks in Contrail
- Configuring EVPN and VXLAN
- Support for EVPN Route Type 5
- play_arrow Example of Deploying a Multi-Tier Web Application Using Contrail
- play_arrow Configuring Services
- play_arrow Configuring Service Chaining
- play_arrow Examples: Configuring Service Chaining
- play_arrow Adding Physical Network Functions in Service Chains
- play_arrow QoS Support in Contrail
- play_arrow BGP as a Service
- play_arrow Load Balancers
- play_arrow Optimizing Contrail
-
- play_arrow Contrail Security
- play_arrow Contrail Security
-
- play_arrow Monitoring and Troubleshooting Contrail
- play_arrow Configuring Traffic Mirroring to Monitor Network Traffic
- play_arrow Understanding Contrail Analytics
- play_arrow Configuring Contrail Analytics
- Analytics Scalability
- High Availability for Analytics
- System Log Receiver in Contrail Analytics
- Sending Flow Messages to the Contrail System Log
- Ceilometer Support in a Contrail Cloud
- User Configuration for Analytics Alarms and Log Statistics
- Alarms History
- Node Memory and CPU Information
- Role- and Resource-Based Access Control for the Contrail Analytics API
- Configuring Analytics as a Standalone Solution
- Configuring Secure Sandesh and Introspect for Contrail Analytics
- play_arrow Using Contrail Analytics to Monitor and Troubleshoot the Network
- Monitoring the System
- Debugging Processes Using the Contrail Introspect Feature
- Monitor > Infrastructure > Dashboard
- Monitor > Infrastructure > Control Nodes
- Monitor > Infrastructure > Virtual Routers
- Monitor > Infrastructure > Analytics Nodes
- Monitor > Infrastructure > Config Nodes
- Monitor > Networking
- Query > Flows
- Query > Logs
- Understanding Flow Sampling
- Example: Debugging Connectivity Using Monitoring for Troubleshooting
- play_arrow Common Support Answers
-
list Table of Contents
keyboard_arrow_right
contrail-status (Viewing Node Status)
date_range
16-Oct-23
Description
Display a list of all components of a Contrail server node (such as control, configuration, database, Web-UI, analytics, or vrouter) and report their current status of active or inactive.
Sample Output
The following example usage displays on a server that is configured for the roles of vrouter, controller, analytics, configuration, web-ui, and database.
Sample Output
content_copy zoom_out_map
root@host:~# contrail-status == Contrail vRouter == supervisor-vrouter: active contrail-vrouter-agent active contrail-vrouter-nodemgr active == Contrail Control == supervisor-control: active contrail-control active contrail-control-nodemgr active contrail-dns active contrail-named active == Contrail Analytics == supervisor-analytics: active contrail-analytics-api active contrail-analytics-nodemgr active contrail-collector active contrail-query-engine active == Contrail Config == supervisor-config: active contrail-api:0 active contrail-config-nodemgr active contrail-discovery:0 active contrail-schema active contrail-svc-monitor active ifmap active rabbitmq-server active == Contrail Web UI == supervisor-webui: active contrail-webui active contrail-webui-middleware active redis-webui active == Contrail Database == supervisord-contrail-database:active contrail-database active contrail-database-nodemgr active
