close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow CTP151 Platform Overview
- play_arrow CTP151 Interface Modules
-
- play_arrow Safety
- play_arrow General Safety Guidelines and Warnings
- play_arrow Module Installation Safety Guidelines and Warnings
- play_arrow Hardware Compliance and Homologation
-
- play_arrow Installation
- play_arrow Unpacking and Mounting the CTP151 Device
- play_arrow Installing Modules
- play_arrow Cabling
-
- play_arrow Configuration
- play_arrow Accessing the CTP151 Platform
- play_arrow Powering On and Initially Configuring the CTP151 Device
-
- play_arrow Maintenance
- play_arrow Maintaining Components
- play_arrow Product Reclamation and Recycling
- play_arrow Contacting Customer Support and Returning the Chassis or Components
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Hardware and Power Failures
-
list Table of Contents
Mini-USB Type-B Console Port Specifications for a CTP151 Device
date_range
16-May-23
A CTP151 device has two ports: an RJ-45 port and a Mini-USB port.
By default, the RJ-45 port is set as the active console port. It can display all the early boot and low-level message output and you can access the device through this port in the debugger prompt.
The Mini-USB console port uses a Mini-B plug (5-pin) connector to connect to a console management device. The default baud rate for the console port is 9600 baud.
Table 1 provides the pinout information of the Mini-USB Type-B console port.
Pin | Signal | Description |
|---|---|---|
1 | VCC | +5 VDC |
2 | D- | Data - |
3 | D+ | Data + |
X | N/C | May be N/C, GND or used as an attached device presence indicator |
4 | GND | Ground |
