close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow CTP151 Platform Overview
- play_arrow CTP151 Interface Modules
-
- play_arrow Planning
- play_arrow System Specifications
- play_arrow Planning and Preparing the Site
- play_arrow Cable and Pinout Specifications
- Cable Specifications for Console Connections for the CTP151 Device
- Mini-USB Type-B Console Port Specifications for a CTP151 Device
- Console Port Connector Pinouts for a CTP151 Device
- USB Port Specifications for a CTP151 Device
- Management Port Connector Pinout Information for the CTP151 Device
- Network Port Connector Pinout Information for a CTP151 Device
- RJ-45 to DB-9 Serial Port Adapter Pinout Information for a CTP151 Device
- CTP151 Interface Module HD-26 Connector Cable Pinouts
-
- play_arrow Safety
- play_arrow General Safety Guidelines and Warnings
- play_arrow Module Installation Safety Guidelines and Warnings
- play_arrow Hardware Compliance and Homologation
-
- play_arrow Configuration
- play_arrow Accessing the CTP151 Platform
- play_arrow Powering On and Initially Configuring the CTP151 Device
-
- play_arrow Maintenance
- play_arrow Maintaining Components
- play_arrow Product Reclamation and Recycling
- play_arrow Contacting Customer Support and Returning the Chassis or Components
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Hardware and Power Failures
-
list Table of Contents
CTP151 Modules Slot and Port Numbering
date_range
16-May-23
The CTP151 device has removable interface modules from the front, but no removable fan trays.
In the CTP151 device, slot numbering is from left to right, 0 to 1. Any single module must be installed in slot 0, and any single clock connection must come from the port in slot 0.
CTP151 port numbering on the front panel for the serial interface module is bottom left 0, top left 1, bottom right 2, and top right 3.
Port numbering for the T1/E1 interface module is 0, 1, 2, and 3, from right to left with a clock port at the far right.
