- play_arrow Overview
- play_arrow CTP151 Platform Overview
- play_arrow CTP151 Interface Modules
-
- play_arrow Planning
- play_arrow System Specifications
- play_arrow Planning and Preparing the Site
- play_arrow Cable and Pinout Specifications
- Cable Specifications for Console Connections for the CTP151 Device
- Mini-USB Type-B Console Port Specifications for a CTP151 Device
- Console Port Connector Pinouts for a CTP151 Device
- USB Port Specifications for a CTP151 Device
- Management Port Connector Pinout Information for the CTP151 Device
- Network Port Connector Pinout Information for a CTP151 Device
- RJ-45 to DB-9 Serial Port Adapter Pinout Information for a CTP151 Device
- CTP151 Interface Module HD-26 Connector Cable Pinouts
-
- play_arrow Safety
- play_arrow General Safety Guidelines and Warnings
- play_arrow Module Installation Safety Guidelines and Warnings
- play_arrow Hardware Compliance and Homologation
-
- play_arrow Configuration
- play_arrow Accessing the CTP151 Platform
- play_arrow Powering On and Initially Configuring the CTP151 Device
-
- play_arrow Maintenance
- play_arrow Maintaining Components
- play_arrow Product Reclamation and Recycling
- play_arrow Contacting Customer Support and Returning the Chassis or Components
-
- play_arrow Troubleshooting
- play_arrow Troubleshooting Hardware and Power Failures
-
Protecting CTP Modules and Slots
To prevent damage from electrostatic discharge, wear an antistatic wrist strap, and ensure proper grounding when handling components.
To protect the modules, components, and slots when installing components, observe the following guidelines:
When handling components, use an antistatic wrist strap connected to a proper grounding device. This action helps to protect the module from damage by electrostatic discharge.
Always handle a module by its edges. Do not touch the components, pins, leads, or solder connections.
Be sure to cover every empty slot with a blank filler panel to protect the device from dust or other foreign substances and to ensure proper device cooling.
Do not discard the antistatic bag. When a module is not in use, store it in an antistatic bag.
