close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Operation, Administration, and Management Features
- play_arrow Ethernet OAM and Connectivity Fault Management for Routers
- Introduction to OAM Connectivity Fault Management (CFM)
- Configure Connectivity Fault Management (CFM)
- CFM Action Profile
- Ethernet Local Management Interface
- CFM Support for CCC Encapsulated Packets
- Configure Unified ISSU for 802.1ag CFM
- CFM Monitoring between CE and PE Devices
- Configure Continuity Check Messages
- Example: Configure Ethernet CFM on Physical Interfaces
- Example: Configure Ethernet CFM on Bridge Connections
- Example: Configure Ethernet CFM over VPLS
- play_arrow Link Fault Management for Routers
- play_arrow Ethernet OAM Link Fault Management for Switches
- play_arrow Ethernet OAM Connectivity Fault Management for Switches
- play_arrow Ethernet Frame Delay
- Ethernet Frame Delay Measurements on Switches
- Configure MEP Interfaces on Switches to Support Ethernet Frame Delay Measurements (CLI Procedure)
- Configure One-Way Ethernet Frame Delay Measurements on Switches (CLI Procedure)
- Configure an Iterator Profile on a Switch (CLI Procedure)
- Trigger an Ethernet Frame Delay Measurement Session on a Switch
- Configure Two-Way Ethernet Frame Delay Measurements on Switches (CLI Procedure)
- play_arrow Ethernet Service OAM (ITU-TY.1731) for Routers
- ITU-T Y.1731 Ethernet Service OAM Overview
- Configure Ethernet Frame Delay Measurement Sessions
- Configuring MEP Interfaces to Support Ethernet Frame Delay Measurements
- Configure Ethernet Frame Loss Measurement
- Configure an Iterator Profile
- Configure Ethernet Synthetic Loss Measurements
- Ethernet Alarm Indication
- Inline Transmission Mode
-
- play_arrow Network Monitoring by using SNMP
- SNMP Architecture and SNMP MIBs Overview
- Understand SNMP Implementation in Junos OS
- Configure SNMP in Junos OS
- Configure Options on Managed Devices for Better SNMP Response Time
- Enterprise Specific Utility MIB to Enhance SNMP Coverage
- Optimize the Network Management System Configuration for the Best Results
- Interfaces to Accept SNMP Requests
- Configure SNMP for Routing Instances
- Configure SNMP Remote Operations
- SNMP Traps
- SNMP Traps Supported by Junos OS
- Trace SNMP Activity
- Access Privileges for an SNMP Group
- Configure Local Engine ID on SNMPv3
- Configure SNMPv3
- Configure SNMPv3 Authentication Type and Encryption Type
- SNMPv3 Traps
- SNMPv3 Informs
- SNMP Communities
- MIB Views
- SNMP MIBs Supported by Junos OS and Junos OS Evolved
- Junos OS SNMP FAQs
- play_arrow Remote Network Monitoring (RMON) with SNMP Alarms and Events
- play_arrow Accounting Options
- play_arrow Monitoring Options
- play_arrow Interface Alarms
- play_arrow IP Monitoring
- play_arrow sFlow Monitoring Technology
- play_arrow Adaptive Sampling for Routers and Switches
- play_arrow Packet Flow Accelerator Diagnostics Software
-
- play_arrow Monitoring Common Security Features
- play_arrow Performance Management
- play_arrow Port Mirroring
- play_arrow Port Mirroring and Analyzers
- Port Mirroring and Analyzers
- Configuring Port Mirroring and Analyzers
- Configuring Port Mirroring Instances
- Configuring Port Mirroring on Physical Interfaces
- Configuring Port Mirroring on Logical Interfaces
- Configuring Port Mirroring for Multiple Destinations
- Configuring Port Mirroring for Remote Destinations
- Configuring Port Mirroring Local and Remote Analysis
- 1:N Port Mirroring to Multiple Destinations on Switches
- Example: Configure Port Mirroring with Family any and a Firewall Filter
- Monitoring Port Mirroring
- Configure Packet Mirroring with Layer 2 Headers for Layer 3 Forwarded Traffic
- Troubleshooting Port Mirroring
-
- play_arrow System Log Messages
- play_arrow Network Management and Troubleshooting
- Compressing Troubleshooting Logs from /var/logs to Send to Juniper Networks Technical Support
- Monitoring and Troubleshooting
- Troubleshooting System Performance with Resource Monitoring Methodology
- Configuring Data Path Debugging and Trace Options
- Using MPLS to Diagnose LSPs, VPNs, and Layer 2 Circuits
- Using Packet Capture to Analyze Network Traffic
- On-Box Packet Sniffer Overview
- Troubleshooting Security Devices
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Network Management and Monitoring Guide
date_range
19-Dec-24
Use this guide to implement and configure the network management technologies that Junos OS supports: Simple Network Management Protocol (SNMP), Remote Monitoring (RMON), Destination Class Usage (DCU) and Source Class Usage (SCU) data, and Accounting Profiles. Alarms, events, and security features are included, as is information on performance management, port mirroring and analyzers, and system logging.
