close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Network Monitoring by using SNMP
- SNMP Architecture and SNMP MIBs Overview
- Understand SNMP Implementation in Junos OS
- Configure SNMP in Junos OS
- Configure Options on Managed Devices for Better SNMP Response Time
- Enterprise Specific Utility MIB to Enhance SNMP Coverage
- Optimize the Network Management System Configuration for the Best Results
- Interfaces to Accept SNMP Requests
- Configure SNMP for Routing Instances
- Configure SNMP Remote Operations
- SNMP Traps
- SNMP Traps Supported by Junos OS
- Trace SNMP Activity
- Access Privileges for an SNMP Group
- Configure Local Engine ID on SNMPv3
- Configure SNMPv3
- Configure SNMPv3 Authentication Type and Encryption Type
- SNMPv3 Traps
- SNMPv3 Informs
- SNMP Communities
- MIB Views
- SNMP MIBs Supported by Junos OS and Junos OS Evolved
- Junos OS SNMP FAQs
- play_arrow Remote Network Monitoring (RMON) with SNMP Alarms and Events
- play_arrow Accounting Options
- play_arrow Monitoring Options
- play_arrow Interface Alarms
- play_arrow IP Monitoring
- play_arrow sFlow Monitoring Technology
- play_arrow Adaptive Sampling for Routers and Switches
- play_arrow Packet Flow Accelerator Diagnostics Software
-
- play_arrow Monitoring Common Security Features
- play_arrow Performance Management
- play_arrow Port Mirroring
- play_arrow Port Mirroring and Analyzers
- Port Mirroring and Analyzers
- Configuring Port Mirroring and Analyzers
- Configuring Port Mirroring Instances
- Configuring Port Mirroring on Physical Interfaces
- Configuring Port Mirroring on Logical Interfaces
- Configuring Port Mirroring for Multiple Destinations
- Configuring Port Mirroring for Remote Destinations
- Configuring Port Mirroring Local and Remote Analysis
- 1:N Port Mirroring to Multiple Destinations on Switches
- Example: Configure Port Mirroring with Family any and a Firewall Filter
- Monitoring Port Mirroring
- Configure Packet Mirroring with Layer 2 Headers for Layer 3 Forwarded Traffic
- Troubleshooting Port Mirroring
-
- play_arrow System Log Messages
- play_arrow Network Management and Troubleshooting
- Compressing Troubleshooting Logs from /var/logs to Send to Juniper Networks Technical Support
- Monitoring and Troubleshooting
- Troubleshooting System Performance with Resource Monitoring Methodology
- Configuring Data Path Debugging and Trace Options
- Using MPLS to Diagnose LSPs, VPNs, and Layer 2 Circuits
- Using Packet Capture to Analyze Network Traffic
- On-Box Packet Sniffer Overview
- Troubleshooting Security Devices
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Trigger an Ethernet Frame Delay Measurement Session on a Switch
date_range
28-Nov-23
To trigger Ethernet frame delay measurement, use the monitor ethernet delay-measurement operational command and specify the following values:
Either one-way (
one-way) or two-way (two-way) measurementEither the MAC address (
remote-mac-address) or the MEP ID (mep) of the remote hostThe maintenance domain (
maintenance-domain)The maintenance association (
maintenance-association)(Optional) Any or all of these options:
count,size,wait, no-session-id-tlv,priority
For example:
content_copy zoom_out_map
user@switch> monitor ethernet delay-measurement one-way 00:05:85:73:39:4a maintenance-domain md6 maintenance-association ma6 count 10 size 50 wait 5 no-session-id-tlv priority 1
