Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close

keyboard_arrow_left

Table of Contents Expand all

play_arrow Overview
- play_arrow Understanding Multicast
play_arrow Managing Group Membership
play_arrow Configuring Protocol Independent Multicast
- play_arrow Understanding PIM
  - PIM Overview
  - PIM on Aggregated Interfaces
- play_arrow Configuring PIM Basics
- play_arrow Routing Content to Densely Clustered Receivers with PIM Dense Mode
- play_arrow Routing Content to Larger, Sparser Groups with PIM Sparse Mode
- play_arrow Configuring Designated Routers
  - Understanding Designated Routers
  - Configuring a Designated Router for PIM
- play_arrow Receiving Content Directly from the Source with SSM
- play_arrow Minimizing Routing State Information with Bidirectional PIM
  - Example: Configuring Bidirectional PIM
- play_arrow Rapidly Detecting Communication Failures with PIM and the BFD Protocol
  - Configuring PIM and the Bidirectional Forwarding Detection (BFD) Protocol
- play_arrow Configuring PIM Options
  - Example: Configuring Nonstop Active Routing for PIM
  - Configuring PIM-to-IGMP and PIM-to-MLD Message Translation
- play_arrow Verifying PIM Configurations
play_arrow Configuring Multicast Routing Protocols
- play_arrow Connecting Routing Domains Using MSDP
  - Examples: Configuring MSDP
  - Configuring Multiple Instances of MSDP
- play_arrow Handling Session Announcements with SAP and SDP
  - Configuring the Session Announcement Protocol
  - Verifying SAP and SDP Addresses and Ports
- play_arrow Facilitating Multicast Delivery Across Unicast-Only Networks with AMT
  - Example: Configuring Automatic IP Multicast Without Explicit Tunnels
- play_arrow Routing Content to Densely Clustered Receivers with DVMRP
  - Examples: Configuring DVMRP
play_arrow Configuring Multicast VPNs
play_arrow General Multicast Options
- play_arrow Bit Index Explicit Replication (BIER)
- play_arrow Prevent Routing Loops with Reverse Path Forwarding
  - Examples: Configuring Reverse Path Forwarding
- play_arrow Use Multicast-Only Fast Reroute (MoFRR) to Minimize Packet Loss During Link Failures
- play_arrow Enable Multicast Between Layer 2 and Layer 3 Devices Using Snooping
- play_arrow Configure Multicast Routing Options
- play_arrow Controller-Based BGP Multicast Signaling
  - Controller-Based BGP Multicast Signaling
play_arrow Troubleshooting
- play_arrow Knowledge Base
  - Knowledge Search
  - JTAC Certified Step-by-Step Troubleshooting: Junos OS Multicast
play_arrow Configuration Statements and Operational Commands
- Junos CLI Reference Overview

list Table of Contents

English

ON THIS PAGE

Purpose
Action
Meaning

keyboard_arrow_right

Verifying the PIM RP Configuration

date_range 23-Nov-23

arrow_backward

arrow_forward

Purpose

Verify that the PIM RP is statically configured with the correct IP address.

Action

From the CLI, enter the show pim rps command.

Sample Output

command-name

content_copy zoom_out_map
user@host> show pim rps
Instance: PIM.master
Address family INET
RP address      Type      Holdtime Timeout Active groups Group prefixes
192.168.14.27   static           0    None             2 224.0.0.0/4

Meaning

The output shows a list of the RP addresses that are configured for PIM. At least one RP must be configured. Verify the following information:

The configured RP is listed with the proper IP address.
Under Type, the word static appears.

arrow_backward PREVIOUS Verifying the PIM Mode and Interface Configuration

NEXT arrow_forward Verifying the RPF Routing Table Configuration

footer-navigation