close
keyboard_arrow_left
Table of Contents
- play_arrow Getting Started
- play_arrow Blueprints
- play_arrow Blueprint Analytics
- What are Blueprint Analytics
- play_arrow Dashboards
- What are Blueprint Analytics Dashboards
- Configure Auto-Enabled Blueprint Analytics Dashboards
- Instantiate Predefined Blueprint Analytics Dashboard
- play_arrow Predefined Dashboards
- Create Blueprint Analytics Dashboard
- Export Blueprint Analytics Dashboard
- Import Blueprint Analytics Dashboard
- Update Blueprint Analytics Dashboard
- Delete Blueprint Analytics Dashboard
- play_arrow Anomalies
- play_arrow Probes
- What are Probes
- Show Context Patterns
- Instantiate Predefined Probe
- play_arrow Predefined Probes
- Probe: BGP Monitoring
- Bandwidth Utilization Probe
- Critical Services: Utilization, Trending, Alerting Probe
- Device Environmental Checks Probe
- Device System Health Probe
- Device Telemetry Health Probe
- Device Traffic Probe
- Drain Traffic Anomaly Probe
- ECMP Imbalance (External Interfaces) Probe
- ECMP Imbalance (Fabric Interfaces) Probe
- ECMP Imbalance (Spine to Superspine Interfaces) Probe
- ESI Imbalance Probe
- EVPN Host Flapping Probe
- EVPN VXLAN Type-3 Route Validation Probe
- EVPN VXLAN Type-5 Route Validation Probe
- External Routes Probe
- Hot/Cold Interface Counters (Fabric Interfaces) Probe
- Hot/Cold Interface Counters (Specific Interfaces) Probe
- Hot/Cold Interface Counters (Spine to Superspine Interfaces) Probe
- Hypervisor and Fabric LAG Config Mismatch Probe (Virtual Infra) Probe
- Hypervisor and Fabric VLAN Config Mismatch Probe
- Hypervisor MTU Mismatch Probe (Virtual Infra - NSX-T Only)
- Hypervisor MTU Threshold Check Probe (Virtual Infra)
- Hypervisor Missing LLDP Config Probe (Virtual Infra)
- Hypervisor Redundancy Checks Probe (Virtual Infra)
- Interface Flapping (Fabric Interfaces) Probe
- Interface Flapping (Specific Interfaces) Probe
- Interface Flapping (Spine to Superspine Interfaces) Probe
- Interface Policy 802.1x Probe
- LAG Imbalance Probe
- Leafs Hosting Critical Services: Utilization, Trending, Alerting Probe
- Link Fault Tolerance in Leaf and Access LAGs Probe
- MAC Monitor Probe
- MLAG Imbalance Probe
- Multiagent Detector Probe
- Optical Transceivers Probe
- Packet Discard Percentage Probe
- Spine Fault Tolerance Probe
- Total East/West Traffic Probe
- VMs without Fabric Configured VLANs Probe (Virtual Infra) Probe
- VXLAN Flood List Validation Probe
- Create Probe
- play_arrow Probe Processors
- Accumulate Processor
- Average Processor
- BGP Session Processor
- Comparison Processor
- Environment Processor
- EVPN Type 3 Processor
- EVPN Type 5 Processor
- Extensible Service Collector Processor
- Generic Graph Collector Processor
- Generic Service Data Collector Processor
- Interface Counters Processor
- Logical Operator Processor
- MAC Processor
- Match Count Processor
- Match Percentage Processor
- Match String Processor
- Max Processor
- Min Processor
- Optical Threshold Processor
- Optical Xcvr Processor
- Periodic Average Processor
- Periodic Change Processor
- Range Processor
- Ratio Processor
- Service Collector Processor
- Set Comparison Processor
- Set Count Processor
- Standard Deviation Processor
- State Processor
- Subtract Processor
- Sum Processor
- System Utilization Processor
- Telemetry Service Health Processor
- Time in State Processor
- Traffic Monitor Processor
- Union Processor
- VXLAN Floodlist Processor
- Import Probe
- Update Probe
- Export Probe
- Delete Probe
- play_arrow Predefined Reports
- play_arrow Root Causes
- play_arrow Staged Datacenter Blueprints
- play_arrow Physical
- play_arrow Build
- play_arrow Topology
- play_arrow Nodes
- Nodes (Datacenter)
- Create Access Switch
- Delete Node
- Update Deploy Mode (Datacenter)
- Unassign Device (Datacenter)
- Execute CLI Show Command (Data Center Blueprint)
- play_arrow Change Hostnames / Names
- Change Assigned Interface Map
- Change Assigned ASN (Datacenter)
- Change Assigned Loopback IP Address (Datacenter)
- Edit Device Properties (Datacenter)
- Update Port Channel ID Range
- View Node's Static Routes
- play_arrow Generic Systems (Internal/External)
- play_arrow Links
- Links (Datacenter)
- play_arrow Add Links
- play_arrow Cabling Map
- play_arrow Link Speeds
- play_arrow LAG
- Change Assigned Link IP Addresses (Datacenter)
- Update Link Properties
- Fetch LLDP Data (Datacenter)
- Delete Link (Datacenter)
- play_arrow Interfaces
- play_arrow Racks
- play_arrow Pods
- play_arrow Planes
-
- play_arrow Virtual
- play_arrow Virtual Networks
- What are Virtual Networks
- Create Virtual Network
- Update Virtual Network Resource Assignments
- Reset Virtual Network Resource Group Override
- Import Virtual Network
- Export Virtual Network to CSV File
- Update Virtual Network Assignments
- Move Virtual Network to Different Routing Zone
- Change Virtual Network Description
- Change Virtual Network Details
- Delete Virtual Network
- play_arrow Routing Zones
- play_arrow Static Routes
- play_arrow Protocol Sessions
- play_arrow Virtual Infrastructure
-
- play_arrow Policies
- play_arrow Endpoints
- play_arrow Security Policies
- play_arrow Interface Policies
- play_arrow Routing Policies
- play_arrow Routing Zone Constraints
- play_arrow Tenants
-
- play_arrow Data Center Interconnect (DCI)
- play_arrow Integrated Interconnect
- play_arrow Over the Top or External Gateways
- play_arrow Settings
- Update ESI MAC msb
-
- play_arrow Catalog
- play_arrow Logical Devices
- play_arrow Interface Maps
- play_arrow Property Sets
- play_arrow Configlets
- play_arrow AAA Servers
- play_arrow Tags
-
- play_arrow Tasks
- play_arrow Connectivity Templates
- Connectivity Templates Introduction
- play_arrow Primitives
- Virtual Network (Single) Primitive
- Virtual Network (Multiple) Primitive
- IP Link Primitive
- Static Route Primitive
- Custom Static Route Primitive
- BGP Peering (IP Endpoint) Primitive
- BGP Peering (Generic System) Primitive
- Dynamic BGP Peering Primitive
- Routing Policy Primitive
- Routing Zone Constraint Primitive
- User-defined
- Pre-defined
- Create Connectivity Template for Multiple VNs on Same Interface (Example)
- Create Connectivity Template for Layer 2 Connected External Router (Example)
- Update Connectivity Template Assignments
- Update Connectivity Template
- Delete Connectivity Template
- play_arrow Fabric Settings
- play_arrow Fabric Policy
- play_arrow Severity Preferences
-
-
- play_arrow Staged Freeform Blueprints
- Freeform Introduction
- play_arrow Blueprints
- play_arrow Physical
- play_arrow Selection
- play_arrow Topology
- play_arrow Systems
- Systems Introduction (Freeform)
- Create Internal System (Freeform)
- Create External System (Freeform)
- Update Assigned Config Template(Freeform)
- Update System Name (Freeform)
- Update Hostname (Freeform)
- Change Assigned Device Profile (Freeform)
- Update System ID Assignment (Freeform)
- Update Deploy Mode (Freeform)
- Add/Remove System Tags (Freeform)
- Delete System (Freeform)
- Device Context (Freeform)
- play_arrow Links
-
- play_arrow Resource Management
- Resource Management Introduction (Freeform)
- play_arrow Blueprint Resources
- play_arrow Allocation Groups
- play_arrow Local Pools
- play_arrow Catalog (Freeform)
- play_arrow Config Templates
- play_arrow Device Profiles
- play_arrow Property Sets
- play_arrow Tags
-
- play_arrow Tasks
- play_arrow Uncommitted Blueprints
- play_arrow Active Datacenter Blueprints
- play_arrow Time Voyager (Blueprints)
- play_arrow Devices
- Device Configuration Lifecycle
- What are Managed Devices
- Add Managed Device
- Drain Device Traffic
- Upgrade Device NOS
- Device AAA
- play_arrow Device
- play_arrow Agent
- play_arrow Pristine Config
- play_arrow Telemetry
- play_arrow Apstra ZTP
- What is Apstra ZTP
- Create User Profile for Communicating with ZTP Server
- Download and Deploy Apstra ZTP Server VM
- Configure Static Management IP Address for Apstra ZTP Server
- Replace SSL Certificate for Apstra ZTP Server GUI
- Create Vendor-specific Custom Configuration
- Configure Credentials for Apstra ZTP Server GUI
- Configure Apstra Server Connection Details
- Configure DHCP Server for Apstra ZTP
- ztp.json Keys
- Configure ztp.json with Configurator
- Configure ztp.json with CLI
- Show Apstra ZTP Logs
- Onboard Devices with Apstra ZTP
- Check ZTP Status of Devices and Services
- Reset Apstra ZTP GUI Admin Password
- Authenticate User (AZTP REST API)
- play_arrow Device Profiles
- play_arrow Design
- play_arrow Logical Devices
- play_arrow Interface Maps
- play_arrow Rack Types
- play_arrow Templates
- play_arrow Config Templates (Freeform)
- play_arrow Configlets (Datacenter)
- play_arrow Property Sets (Datacenter)
- play_arrow TCP/UDP Ports
- play_arrow Tags
-
- play_arrow Resources
- play_arrow Telemetry Analytics
- Analytics Telemetry Services
- Analytics Telemetry Service Registry
- Create Telemetry Service Schema
- Telemetry Collection Statistics
- Telemetry Streaming
- Apstra Telemetry Streaming Plugin for Telegraf
- Route Anomalies for a Host - Example
- Juniper Telemetry Commands
- Cisco Telemetry Commands
- Arista Telemetry Commands
- Linux Server Telemetry Command
- Debugging Telemetry
- play_arrow Exploratory Analytics
- play_arrow External Systems
- play_arrow Providers (Not SSO)
- play_arrow SSO Providers
- play_arrow Provider Role Mapping
-
- play_arrow Platform
- play_arrow User Management
- play_arrow Security
- play_arrow External Services
- play_arrow Streaming
- Event Log (Audit Log)
- Licenses
- play_arrow Apstra Edge
- play_arrow Apstra VM Clusters
- play_arrow Developers
- play_arrow Technical Support
- Check Apstra Versions and Patent Numbers
-
- play_arrow Favorites & User
- play_arrow Apstra Server Management
- Apstra Server Introduction
- Monitor Apstra Server via CLI
- Restart Apstra Server
- Reset Apstra Server VM Password
- Reinstall Apstra Server
- Apstra Database Overview
- Back up Apstra Database
- Restore Apstra Database
- Reset Apstra Database
- Migrate Apstra Database
- Replace SSL Certificate on Apstra Server with Signed One
- Replace SSL Certificate on Apstra Server with Self-Signed One
- Change Apstra Server Hostname
- FIPS 140-2 Support
- play_arrow Apstra CLI Utility
- play_arrow Guides
- play_arrow References
list Table of Contents
ON THIS PAGE
sFlow IEs (Counter Samples)
The Apstra Flow collector supports the following sFlow IEs (information elements):
if_counters (enterprise = 0, format = 1)
- ifIndex
- ifType
- ifSpeed
- ifDirection
- ifStatus
- ifInOctets
- ifInUcastPkts
- ifInMulticastPkts
- ifInBroadcastPkts
- ifInDiscards
- ifInErrors
- ifInUnknownProtos
- ifOutOctets
- ifOutUcastPkts
- ifOutMulticastPkts
- ifOutBroadcastPkts
- ifOutDiscards
- ifOutErrors
- ifPromiscuousMode
ethernet_counters (enterprise = 0, format =2)
- dot3StatsAlignmentErrors
- dot3StatsFCSErrors
- dot3StatsSingleCollisionFrames
- dot3StatsMultipleCollisionFrames
- dot3StatsSQETestErrors
- dot3StatsDeferredTransmissions
- dot3StatsLateCollisions
- dot3StatsExcessiveCollisions
- dot3StatsInternalMacTransmitErrors
- dot3StatsCarrierSenseErrors
- dot3StatsFrameTooLongs
- dot3StatsInternalMacReceiveErrors
- dot3StatsSymbolErrors
tokenring_counters (enterprise = 0, format = 3)
- dot5StatsLineErrors
- dot5StatsBurstErrors
- dot5StatsACErrors
- dot5StatsAbortTransErrors
- dot5StatsInternalErrors
- dot5StatsLostFrameErrors
- dot5StatsReceiveCongestions
- dot5StatsFrameCopiedErrors
- dot5StatsTokenErrors
- dot5StatsSoftErrors
- dot5StatsHardErrors
- dot5StatsSignalLoss
- dot5StatsTransmitBeacons
- dot5StatsRecoverys
- dot5StatsLobeWires
- dot5StatsRemoves
- dot5StatsSingles
- dot5StatsFreqErrors
vg_counters (enterprise = 0, format = 4)
- dot12InHighPriorityFrames
- dot12InHighPriorityOctets
- dot12InNormPriorityFrames
- dot12InNormPriorityOctets
- dot12InIPMErrors
- dot12InOversizeFrameErrors
- dot12InDataErrors
- dot12InNullAddressedFrames
- dot12OutHighPriorityFrames
- dot12OutHighPriorityOctets
- dot12TransitionIntoTrainings
- dot12HCInHighPriorityOctets
- dot12HCInNormPriorityOctets
- dot12HCOutHighPriorityOctets
vlan_counters (enterprise = 0, format = 5)
- vlan_id
- octets
- ucastPkts
- multicastPkts
- broadcastPkts
- discards
ieee80211_counters (enterprise = 0, format = 6)
- dot11TransmittedFragmentCount
- dot11GroupTransmittedFrameCount
- dot11FailedCount
- dot11RetryCount
- dot11MultipleRetryCount
- dot11FrameDuplicateCount
- dot11RTSSuccessCount
- dot11RTSFailureCount
- dot11AckFailureCount
- dot11ReceivedFragmentCount
- dot11GroupReceivedFrameCount
- dot11FCSErrorCount
- dot11TransmittedFrameCount
- dot11WEPUndecryptableCount
- dot11QosDiscardedFragmentCount
- dot11AssociatedStationCount
- dot11QosCFPollsReceivedCount
- dot11QosCFPollsUnusedCount
- dot11QosCFPollsUnusableCount
- dot11QosCFPollsLostCount
lag_port_stats (enterprise = 0, format = 7)
- dot3adAggPortActorSystemID
- dot3adAggPortPartnerOperSystemID
- dot3adAggPortAttachedAggID
- dot3adAggPortState
- dot3adAggPortStatsLACPDUsRx
- dot3adAggPortStatsMarkerPDUsRx
- dot3adAggPortStatsMarkerResponsePDUsRx
- dot3adAggPortStatsUnknownRx
- dot3adAggPortStatsIllegalRx
- dot3adAggPortStatsLACPDUsTx
- dot3adAggPortStatsMarkerPDUsTx
- dot3adAggPortStatsMarkerResponsePDUsTx
ib_counters (enterprise = 0, format = 9)
- PortXmitData
- PortRcvData
- PortXmitPkts
- PortRcvPkts
- SymbolErrorCounter
- LinkErrorRecoveryCounter
- LinkDownedCounter
- PortRcvErrors
- PortRcvRemotePhysicalErrors
- PortRcvSwitchRelayErrors
- PortXmitDiscards
- PortXmitConstraintErrors
- PortRcvConstraintErrors
- LocalLinkIntegrityErrors
- ExcessiveBufferOverrunErrors
- VL15Dropped
sfp (enterprise = 0, format = 10)
- module_id
- module_num_lanes
- module_supply_voltage
- module_temperature
- index
- tx_bias_current
- tx_power
- tx_power_min
- tx_power_max
- tx_wavelength
- rx_power
- rx_power_min
- rx_power_max
- rx_wavelength
queue_length (enterprise = 0, format = 1003)
- queueIndex
- segmentSize
- queueSegments
- queueLength0
- queueLength1
- queueLength2
- queueLength4
- queueLength8
- queueLength32
- queueLength128
- queueLength1024
- queueLengthMore
- dropped
host_cpu (enterprise = 0, format = 2003)
- load_one
- load_five
- load_fifteen
- proc_run
- proc_total
- cpu_num
- cpu_speed
- uptime
- cpu_user
- cpu_nice
- cpu_system
- cpu_idle
- cpu_wio
- cpu_intr
- cpu_sintr
- interrupts
- contexts
host_memory (enterprise = 0, format = 2004)
- mem_total
- mem_free
- mem_shared
- mem_buffers
- mem_cached
- swap_total
- swap_free
- page_in
- page_out
- swap_in
- swap_out
host_disk_io (enterprise = 0, format = 2005)
- hyper disk_total
- disk_free
- part_max_used
- reads
- bytes_read
- read_time
- writes
- bytes_written
- write_time
host_net_io (enterprise = 0, format = 2006)
- hyper bytes_in
- pkts_in
- errs_in
- drops_in
- bytes_out
- packets_out
- errs_out
- drops_out
mib2_ip_group (enterprise = 0, format = 2007)
- ipForwarding
- ipDefaultTTL
- ipInReceives
- ipInHdrErrors
- ipInAddrErrors
- ipForwDatagrams
- ipInUnknownProtos
- ipInDiscards
- ipInDelivers
- ipOutRequests
- ipOutDiscards
- ipOutNoRoutes
- ipReasmTimeout
- ipReasmReqds
- ipReasmOKs
- ipReasmFails
- ipFragOKs
- ipFragFails
- ipFragCreates
mib2_icmp_group (enterprise = 0, format = 2008)
- icmpInMsgs
- icmpInErrors
- icmpInDestUnreachs
- icmpInTimeExcds
- icmpInParamProbs
- icmpInSrcQuenchs
- icmpInRedirects
- icmpInEchos
- icmpInEchoReps
- icmpInTimestamps
- icmpInAddrMasks
- icmpInAddrMaskReps
- icmpOutMsgs
- icmpOutErrors
- icmpOutDestUnreachs
- icmpOutTimeExcds
- icmpOutParamProbs
- icmpOutSrcQuenchs
- icmpOutRedirects
- icmpOutEchos
- icmpOutEchoReps
- icmpOutTimestamps
- icmpOutTimestampReps
- icmpOutAddrMasks
- icmpOutAddrMaskReps
mib2_tcp_group (enterprise = 0, format = 2009
- tcpRtoAlgorithm
- tcpRtoMin
- tcpRtoMax
- tcpMaxConn
- tcpActiveOpens
- tcpPassiveOpens
- tcpAttemptFails
- tcpEstabResets
- tcpCurrEstab
- tcpInSegs
- tcpOutSegs
- tcpRetransSegs
- tcpInErrs
- tcpOutRsts
- tcpInCsumErrs
mib2_udp_group (enterprise = 0, format = 2010)
- udpInDatagrams
- udpNoPorts
- udpInErrors
- udpOutDatagrams
- udpRcvbufErrors
- udpSndbufErrors
- udpInCsumErrors
virt_disk_io (enterprise = 0, format = 2103)
- capacity
- allocation
- available
- rd_req
- rd_bytes
- wr_req
- wr_bytes
- errs
virt_net_io (enterprise = 0, format = 2104)
- rx_bytes
- rx_packets
- rx_errs
- rx_drop
- tx_bytes
- tx_packets
- tx_errs
- tx_drop
jmx_statistics (enterprise = 0, format = 2106)
- heap_initial
- heap_used
- heap_committed
- heap_max
- non_heap_initial
- non_heap_used
- non_heap_committed
- non_heap_max
- gc_count
- gc_time
- classes_loaded
- classes_total
- classes_unloaded
- compilation_time
- thread_num_live
- thread_num_daemon
- thread_num_started
- fd_open_count
- fd_max_count
memcached_counters (enterprise = 0, format = 2200)
- uptime
- rusage_user
- rusage_system
- curr_connections
- total_connections
- connection_structures
- cmd_get
- cmd_set
- cmd_flush
- get_hits
- get_misses
- delete_hits
- delete_misses
- incr_hits
- incr_misses
- decr_hits
- decr_misses
- cas_misses
- cas_hits
- cas_badval
- auth_cmds
- auth_errors
- bytes_read
- bytes_written
- limit_maxbytes
- conn_accepts
- listen_disabled_num
- threads
- conn_yields
- bytes
- curr_items
- total_items
- evictions
http_counters (enterprise = 0, format = 2201)
- method_option_count
- method_get_count
- method_head_count
- method_post_count
- method_put_count
- method_delete_count
- method_trace_count
- method_connect_count
- method_other_count
- status_1XX_count
- status_2XX_count
- status_3XX_count
- status_4XX_count
- status_5XX_count
- status_other_count
app_operations (enterprise = 0, format = 2202)
- success
- other
- timeout
- internal_error
- bad_request
- forbidden
- too_large
- not_implemented
- not_found
- unavailable
- unauthorized
app_resources (enterprise = 0, format = 2203)
- user_time
- system_time
- mem_used
- mem_max
- fd_open
- fd_max
- conn_open
- conn_max
memcache_counters (enterprise = 0, format = 2204)
- cmd_set
- cmd_touch
- cmd_flush
- get_hits
- get_misses
- delete_hits
- delete_misses
- incr_hits
- incr_misses
- decr_hits
- decr_misses
- cas_hits
- cas_misses
- cas_badval
- auth_cmds
- auth_errors
- threads
- conn_yields
- listen_disabled_num
- curr_connections
- ejected_connections
- total_connections
- connection_structures
- evictions
- reclaimed
- curr_items
- total_items
- bytes_read
- bytes_written
- bytes
- limit_maxbytes
app_workers (enterprise = 0, format = 2206)
- workers_active
- workers_idle
- workers_max
- req_delayed
- req_dropped
bst_device_buffers (enterprise = 4413, format = 1)
- unicast buffers percentage utilization
- multicast buffers percentage utilization
bst_port_buffers (enterprise = 4413, format = 2)
- ingress unicast buffers utilization
- ingress multicast buffers utilization
- egress unicast buffers utilization
- egress multicast buffers utilization
- per egress queue unicast buffers utilization
- per egress queue multicast buffers utilization
hw_tables (enterprise = 4413, format = 3)
- broadcom_hw_host_entries
- broadcom_hw_host_entries_max
- broadcom_hw_ipv4_entries
- broadcom_hw_ipv4_entries_max
- broadcom_hw_ipv6_entries
- broadcom_hw_ipv6_entries_max
- broadcom_hw_ipv4_ipv6_entries
- broadcom_hw_ipv6_ipv6_entries_max
- broadcom_hw_long_ipv6_entries
- broadcom_hw_long_ipv6_entries_max
- broadcom_hw_total_routes
- broadcom_hw_total_routes_max
- broadcom_hw_ecmp_nexthops
- broadcom_hw_ecmp_nexthops_max
- broadcom_hw_mac_entries
- broadcom_hw_mac_entries_max
- broadcom_hw_ipv4_neighbors
- broadcom_hw_ipv6_neighbors
- broadcom_hw_ipv4_routes
- broadcom_hw_ipv6_routes
- broadcom_hw_acl_ingress_entries
- broadcom_hw_acl_ingress_entries_max
- broadcom_hw_acl_ingress_counters
- broadcom_hw_acl_ingress_counters_max
- broadcom_hw_acl_ingress_meters
- broadcom_hw_acl_ingress_meters_max
- broadcom_hw_acl_ingress_slices
- broadcom_hw_acl_ingress_slices_max
- broadcom_hw_acl_egress_entries
- broadcom_hw_acl_egress_entries_max
- broadcom_hw_acl_egress_counters
- broadcom_hw_acl_egress_counters_max
- broadcom_hw_acl_egress_meters
- broadcom_hw_acl_egress_meters_max
- broadcom_hw_acl_egress_slices
- broadcom_hw_acl_egress_slices_max
