Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Installing the MX2020 Craft Interface

To install the craft interface (see Figure 1):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Grasp the craft interface with one hand, and hold the bottom edge of the craft interface with the other hand to support its weight.
  3. Orient the ribbon cable so that it plugs into the connector socket. The connector is keyed and can be inserted only one way.
  4. Align the bottom of the craft interface with the sheet metal above the card cage, and press it into place.
  5. Tighten the screws on the left and right corners of the craft interface faceplate by using the Torx (T10) screwdriver.
  6. Reattach any external devices connected to the craft interface.
Figure 1: Installing the Craft InterfaceInstalling the Craft Interface

Related Documentation