Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Resolve Out-of-Band Changes

You can resolve the out-of-band changes by accepting or rejecting the configuration changes.

Note:

In a multinode high availability (MNHA) pair, out-of-band changes are detected for each device in the pair.
  1. Click SRX > Device Management > Devices.

    For the out-of-band changes, the Device Config Status field shows that the device configuration is changed.

  2. Select the device and click Resolve.
    The page for resolving the conflicts shows the following information:

    • SD Cloud Config Changes—Changes that you have added using Juniper Security Director Cloud UI.

    • Device Config Changes—Changes that you have added to the device using commands.

  3. Resolve the out-of-band changes by taking the appropriate action as described in the table.
    Table 1: Resolve out-of-band changes

    Action

    Description

    Reject the out-of-band changes.

    1. Click Reject Device Config Changes to delete the device configurations that are added via device commands or any other way apart from Juniper Security Director Cloud UI.

      A confirmation message is displayed. You can preview the out-of-band device configuration changes using the Preview link in the confirmation message.

    2. Click Yes to confirm.

      A notification message with job details is displayed.

      On the Device page, the Device Config Status field is cleared and it indicates that there are no more out-of-band device configuration changes to resolve.

    The rejected out-of-band device changes are rolled back.

    Accept the out-of-band changes.

    1. Click Accept Device Config Changes to add the out-of-band device changes to Juniper Security Director Cloud. A confirmation message to accept the out-of-band device configuration changes is displayed.

      Note:

      Accepting the out-of-band device changes will discard any changes shown in the SD Cloud Config Changes with the changes shown in Device Config Changes in the resolve conflict page.

    2. Click Yes to accept the out-of-band device changes to Juniper Security Director Cloud.

      On the Device page the Device Config Status field is cleared and it indicates that there are no more out-of-band device configuration changes to resolve.