Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Enroll SRX Series Firewalls from ATP Cloud to Juniper Security Director Cloud

You can enroll the existing SRX Series Firewalls (available in ATP Cloud) to Juniper Security Director Cloud. After the enrollment, you can use the Juniper Security Director Cloud to access ATP Cloud related screens for the SRX Series Firewalls.

Before You Begin

Before enrolling your SRX Series Firewall, you must map your security realm from ATP Cloud to Juniper Security Director Cloud. For more information, see Map an Existing ATP Realm to Juniper Security Director Cloud.

About the Task

Using the Enroll to ATP menu, you can obtain commands to enroll your SRX Series Firewall (from ATP Cloud) to Juniper Security Director Cloud. The enrollment commands perform basic configuration tasks such as:

  • Download and install the certificate authorities (CAs) onto your SRX Series Firewall.

  • Create local certificates and enroll the certificates with the cloud server.

  • Establish a secure connection to the cloud server.

To enroll your SRX Series Firewall from ATP Cloud to Juniper Security Director Cloud:

  1. Select SRX > Device Management > Devices.

    The Devices page opens.

  2. Select the device or device cluster and click More > Enroll to ATP.

    The page with enrollment commands is displayed.

  3. Based on the Junos OS version on your device, copy the relevant command to your clipboard and click OK.
  4. Log on to your SRX Series Firewall and paste the command into the Junos OS CLI (operational mode).
    Note:

    • The command is valid for 7 days.

    • Running the enrollment command will overwrite the existing enrollments for your device.
  5. Press Enter.
    Note:

    If the operation fails, dis-enroll the device and then re-enroll it.

    A message about successful device enrollment is displayed on your device.

Related Documentation