- play_arrow Features Common to EVPN-VXLAN, EVPN-MPLS, and EVPN-VPWS
- play_arrow Configuring Interfaces
- play_arrow MAC Address Features with EVPN Networks
- play_arrow Configuring Routing Instances for EVPN
- Configuring EVPN Routing Instances
- Configuring EVPN Routing Instances on EX9200 Switches
- MAC-VRF Routing Instance Type Overview
- EVPN Type 5 Route with VXLAN Encapsulation for EVPN-VXLAN
- EVPN Type 5 Route with MPLS encapsulation for EVPN-MPLS
- Understanding EVPN Pure Type 5 Routes
- Seamless VXLAN Stitching with Symmetric EVPN Type 2 Routes using Data Center Interconnect
- Symmetric Integrated Routing and Bridging with EVPN Type 2 Routes in EVPN-VXLAN Fabrics
- EVPN Type 2 and Type 5 Route Coexistence with EVPN-VXLAN
- Ingress Virtual Machine Traffic Optimization
- Tracing EVPN Traffic and Operations
- Migrating From BGP VPLS to EVPN Overview
- Configuring EVPN over Transport Class Tunnels
- Example: Configuring EVPN-VPWS over Transport Class Tunnels
- play_arrow Configuring Route Targets
- play_arrow Routing Policies for EVPN
- play_arrow Layer 3 Gateways with Integrated Routing and Bridging for EVPN Overlays
- play_arrow EVPN Multihoming
- EVPN Multihoming Overview
- EVPN Multihoming Designated Forwarder Election
- Understanding Automatically Generated ESIs in EVPN Networks
- Easy EVPN LAG (EZ-LAG) Configuration
- Configuring EVPN Active-Standby Multihoming to a Single PE Device
- Configuring EVPN-MPLS Active-Standby Multihoming
- Example: Configuring Basic EVPN-MPLS Active-Standby Multihoming
- Example: Configuring EVPN-MPLS Active-Standby Multihoming
- Example: Configuring Basic EVPN Active-Active Multihoming
- Example: Configuring EVPN Active-Active Multihoming
- Example: Configuring LACP for EVPN Active-Active Multihoming
- Example: Configuring LACP for EVPN VXLAN Active-Active Multihoming
- Example: Configuring an ESI on a Logical Interface With EVPN-MPLS Multihoming
- Configuring Dynamic List Next Hop
- play_arrow Link States and Network Isolation Conditions in EVPN Networks
- play_arrow EVPN Proxy ARP and ARP Suppression, and NDP and NDP Suppression
- play_arrow Configuring DHCP Relay Agents
- play_arrow High Availability in EVPN
- play_arrow Monitoring EVPN Networks
- play_arrow Layer 2 Control Protocol Transparency
-
- play_arrow EVPN-MPLS
- play_arrow Overview
- play_arrow Convergence in an EVPN MPLS Network
- play_arrow Pseudowire Termination at an EVPN
- play_arrow Configuring the Distribution of Routes
- Configuring an IGP on the PE and P Routers on EX9200 Switches
- Configuring IBGP Sessions Between PE Routers in VPNs on EX9200 Switches
- Configuring a Signaling Protocol and LSPs for VPNs on EX9200 Switches
- Configuring Entropy Labels
- Configuring Control Word for EVPN-MPLS
- Understanding P2MPs LSP for the EVPN Inclusive Provider Tunnel
- Configuring Bud Node Support
- play_arrow Configuring VLAN Services and Virtual Switch Support
- play_arrow Configuring Integrated Bridging and Routing
- EVPN with IRB Solution Overview
- An EVPN with IRB Solution on EX9200 Switches Overview
- Anycast Gateways
- Configuring EVPN with IRB Solution
- Configuring an EVPN with IRB Solution on EX9200 Switches
- Example: Configuring EVPN with IRB Solution
- Example: Configuring an EVPN with IRB Solution on EX9200 Switches
- play_arrow Configuring IGMP or MLD Snooping with EVPN-MPLS
-
- play_arrow EVPN E-LAN Services
- play_arrow EVPN-VPWS
- play_arrow Configuring VPWS Service with EVPN Mechanisms
- Overview of VPWS with EVPN Signaling Mechanisms
- Control word for EVPN-VPWS
- Overview of Flexible Cross-Connect Support on VPWS with EVPN
- Overview of Headend Termination for EVPN VPWS for Business Services
- Configuring VPWS with EVPN Signaling Mechanisms
- Example: Configuring VPWS with EVPN Signaling Mechanisms
- FAT Flow Labels in EVPN-VPWS Routing Instances
- Configuring EVPN-VPWS over SRv6
- Configuring Micro-SIDs in EVPN-VPWS
-
- play_arrow EVPN-ETREE
- play_arrow Overview
- play_arrow Configuring EVPN-ETREE
-
- play_arrow Using EVPN for Interconnection
- play_arrow Interconnecting VXLAN Data Centers With EVPN
- play_arrow Interconnecting EVPN-VXLAN Data Centers Through an EVPN-MPLS WAN
- play_arrow Extending a Junos Fusion Enterprise Using EVPN-MPLS
-
- play_arrow PBB-EVPN
- play_arrow Configuring PBB-EVPN Integration
- play_arrow Configuring MAC Pinning for PBB-EVPNs
-
- play_arrow EVPN Standards
- play_arrow Supported EVPN Standards
-
- play_arrow VXLAN-Only Features
- play_arrow Flexible VXLAN Tunnels
- play_arrow Static VXLAN
-
- play_arrow Configuration Statements and Operational Commands
PIM NSR and Unified ISSU Support for VXLAN Overview
Starting in Junos OS Release 16.2R1, Protocol Independent Multicast (PIM) nonstop active routing (NSR) support for Virtual Extensible LAN (VXLAN) is supported on MX Series routers.
The Layer 2 address learning daemon (l2ald) passes VXLAN parameters
(VXLAN multicast group addresses and the source interface for a VXLAN
tunnel [vtep-source-interface]) to the routing protocol
process on the primary Routing Engine. The routing protocol process
forms PIM joins with the multicast routes through the pseudo-VXLAN
interface based on these configuration details.
Because the l2ald daemon does not run on the backup Routing Engine, the configured parameters are not available to the routing protocol process in the backup Routing Engine when NSR is enabled. The PIM NSR mirroring mechanism provides the VXLAN configuration details to the backup Routing Engine, which enables creation of the required states. The routing protocol process matches the multicast routes on the backup Routing Engine with PIM states, which maintains the multicast routes in the Forwarding state.
In response to Routing Engine switchover, the multicast routes remain in the Forwarding state on the new primary Routing Engine. This prevents traffic loss during Routing Engine switchover. When the l2ald process becomes active, it refreshes VXLAN configuration parameters to PIM.
For this feature, NSR support is available for VXLAN in PIM sparse mode.
This feature does not introduce any new CLI commands. You can
issue the following show commands on the backup Routing
Engine to monitor the PIM joins and multicast routes on the backup
Routing Engine:
show pim join extensiveshow multicast route extensive
Unified ISSU Support
Starting in Junos OS Release 17.2 R1, unified in-service software upgrade is supported for VXLAN using PIM on MX Series routers. ISSU enables you to upgrade your Junos OS software on your MX Series router with no disruption on the control plane and with minimal disruption of traffic. Unified ISSU is supported only on dual Routing Engine platforms. The graceful Routing Engine switchover (GRES) and nonstop active routing (NSR) features must both be enabled. Unified ISSU allows you to eliminate network downtime, reduce operating costs, and deliver higher levels of services. See Getting Started with Unified In-Service Software Upgrade.
Unified ISSU is not supported on the QFX series switches.
To enable GRES, include the graceful-switchover statement
at the [edit chassis redundancy] hierarchy level.
To enable NSR, include the nonstop-routing statement
at the [edit routing-options] hierarchy level and the commit synchronize statement at the [edit system] hierarchy level.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.
