Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

Installing an MX960 AS MSC

date_range 06-May-21

To install an AS MSC (see Figure 1):

  1. Attach an ESD grounding strap to your bare wrist, and connect the other end of the strap to an ESD grounding point.
  2. Align the notches in the connector at the rear of the AS MSC with the notches in the AS MSC slot (slot 0—the top slot in the AS MLC ), and then slide the AS MSC in until it lodges firmly in the AS MLC.
    CAUTION:

    Slide the AS MSC straight into the slot to avoid damaging the components on the bottom of the AS MSC.

  3. Use one of the following methods to bring the AS MSC online:
    • Press the AS MSC offline/online button until the LED light turns green.

    • Issue the following CLI command:

      content_copy zoom_out_map
      user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online

      For more information about the command, see the CLI Explorer.

    The normal functioning status LED confirms that the AS MSC is online. You can also verify correct AS MSC functioning by issuing the show chassis fpc pic-status command..

Figure 1: Installing an AS MSCInstalling an AS MSC
footer-navigation