User Session Details Window

The User Session Details window provides information about the active sessions within the node selected in the View pane. To open this window, click the Details button in the Current Sessions or Current Sessions by Type monitors.

The following table describes the columns that appear in the user session details table:

Table 1: User Session Details Table
Table Column	Description
User Name	Client’s user name
MAC Address	Client’s MAC address.
Device Type	Client’s device type.
Device Group	Client’s device group.
Device Profile	Client’s device profile.
Controller IP	IP address of the controller to which the client is connected.
AP ID	ID of the wireless access point to which the client is connected.
AP NAME	Name of the wireless access point to which the client is connected.
SSID	SSID to which the wireless client is connected.
VLAN	VLAN to which the client is connected.
Client IP	Client’s IP address.
Auth Type	Authorization type used for the client.
B/w[KBps]	Bandwidth used by the client.
Data Usage (KBytes)	Data transmitted and received by the client, in kilobytes.
Elapsed Time	Length of time the session has been active.
Sample Time	Time when the most recent sample was taken.
RSSI	Received signal strength indication (RSSI). Specified in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal.
Roam In Time	The time when the session roamed in to the wireless access point.

Tip:

Some table columns are hidden by default. To select which columns to display, mouse over any column heading, click the arrow that appears, mouse over Columns in the drop-down menu, and then select the columns to display from the list.