Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Viewing RFC 2544 Test Results

After the test run is completed, you can view the results as follows:

  • To view the test results of an RFC 2544 test in CSD, select the test profile in the ServicePerformance-RFC2544 tab. The test results are displayed in the bottom pane.

  • To view the test results of an RFC 2544 test in SAD, go to the OAM-RFC2544-Test > Manage Tests page, select the test for which you want to view the results, and click Actions > View Test Result.

The test results are based on the test parameter or metric that you chose while creating the test profile.

  • If you have created a test profile to measure throughput, the following tabs appear:

    • Throughput Chart—Displays a chart that shows the throughput achieved for various frame lengths. Hover over various frame lengths on the chart to view details such as theoretical rate, transmitted (TX) packets, received packets (RX) packets, TX bytes, RX bytes, bandwidth, and iteration count. You can view more information on the test results in the Throughput Test Result tab.

    • Throughput Test Result—Displays the throughput results for different packet sizes and bandwidths.

    • Throughput Summary—Displays the test profile and test configuration.

  • If you have created a test profile to measure frame loss, the following tabs appear:

    • Frameloss Chart—Displays a chart that shows the frame loss percentage for various frame lengths. Hover over various frame lengths on the chart to view details such as theoretical rate, TX packets, RX packets, TX bytes, RX bytes, bandwidth, and iteration count. You can view more information on the test results in the Frameloss Test Result tab.

    • Frameloss Test Result—Displays the frame loss results for different packet sizes and bandwidths.

    • Frameloss Summary—Displays the test profile and test configuration.

  • If you have created a test profile to measure latency, the following tabs appear:

    • Latency Chart—Displays a chart that shows the latency for various frame lengths. Hover over various frame lengths on the chart to view details such as elapsed time, TX packets, RX packets, packets-per-second (PPS), measured bandwidth, and iteration count. You can view more information on the test results in the Latency Test Result tab.

    • Latency Test Result—Displays the latency results for different packet sizes and bandwidths.

    • Latency Summary—Displays the test profile and test configuration.

  • If you have created a test profile to measure bursty frames, the following tabs appear:

    • Back Back Frame Chart—Displays a chart that shows the throughput achieved for various frame lengths. Hover over various frame lengths on the chart to view details such as elapsed time, TX packets, RX packets, TX bytes, RX bytes, bandwidth, and iteration count. You can view more information on the test results in the Back Back Frame Test Result tab.

    • Back Back Frame Test Result—Displays the back-to-back frame results for different packet sizes and bandwidths.

    • Back Back Frame Summary—Displays the test profile and test configuration.

Related Documentation