close
keyboard_arrow_left
Table of Contents
- play_arrow Get Started
- play_arrow WLANs and WLAN Templates
- play_arrow Security
- Configure AP Threat Protection
- RSSI, Roaming, and Fast Roaming
- play_arrow RADIUS
- play_arrow Preshared Keys
- Rogue, Neighbor, and Honeypot Access Points
- play_arrow PCI DSS Compliance
- play_arrow WxLAN Access Policies
- Using WLAN Templates in a Device Profile
- Configure a WLAN Template
- Adding a WLAN
- WLAN Options
- Tips for Wi-Fi 6E (Video)
- Add a Bonjour Gateway to a WLAN
- Configure a Third-Party Tunnel
- Enable Geofencing
- Wi-Fi Data Rate Configuration
- DSCP Mapping
- WLAN Changes That Reset The Radio
- play_arrow Integrations
- play_arrow WLAN Guest Portal
- Compare WLAN Guest Portal Options
- Automatic Client VLAN Assignments
- play_arrow Custom Guest Portal
- Use an External Portal for Guest Access
- play_arrow Use an Identity Provider for Guest Access
- Authorize, Reauthorize, and Reconnect Guest Clients
- Troubleshoot a Guest Network That Doesn't Work
- FAQs: Guest Portal
- play_arrow Radio Management
- play_arrow Wireless SLEs
- play_arrow Troubleshooting
- Using SLEs for Troubleshooting
- Wi-Fi Reason Codes
- play_arrow Troubleshooting an Access Point
- Replace an AP
- Reset an AP to the Factory-Default Configuration
- Troubleshooting Wireless Issues
- Common Wi-Fi Issues
- Dynamic and Manual Packet Captures
- Steer Clients to the 5-GHz Band
- Bonjour and Bluetooth Devices
- LLDP-MED Power Negotiation
- Troubleshoot Your Integration with Aruba ClearPass
- Use Labels to Identify "Unknown" Applications
- play_arrow Technology Reference
list Table of Contents
Manually Upload Your Floorplan
date_range
07-Mar-25
Upload an image file to use as your floorplan.
Before You Begin
Obtain an image file in a supported format: PNG (recommended), JPG, JPEG, GIF, or BMP.
Crop the image so that there is little white space around the perimeter of the floorplan as possible.
Determine the known physical distance of two points and correlate them to the same two points on the floor plan. For example, the width of a room or the length of a hallway.
You’ll need this information to set the scale. If you don’t have this information, you can look for a standard doorway on the floorplan and scale to a typical width of 0.91 meters (3 feet).
- From the left menu of the Juniper Mist portal, select Location > Live View.
- Upload your image file:
- Click Add Floorplan.
- Follow the on-page prompts to enter a name and upload the image.
- Click Save (in the top right corner of the page).
