request chassis cluster failover redundancy-group
Syntax
request chassis cluster failover node node-number redundancy-group redundancy-group-number
Description
For chassis cluster configurations,
initiate manual failover in a redundancy group from one node to the
other, which becomes the primary node, and automatically reset the
priority of the group to 255. The failover stays in effect until the
new primary node becomes unavailable, the threshold of the redundancy
group reaches 0, or you use the request chassis cluster failover
reset command.
After a manual failover,
you must use the request chassis cluster failover reset command before initiating another failover.
Options
nodenode-number—Number of the chassis cluster node to which the redundancy group fails over.Range: 0 or 1
redundancy-groupgroup-number—Number of the redundancy group on which to initiate manual failover. Redundancy group 0 is a special group consisting of the two Routing Engines in the chassis cluster.Range: 0 through 255
Required Privilege Level
maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis cluster failover redundancy-group
user@host> request chassis cluster failover redundancy-group 0 node 1
{primary:node0}
user@host> request chassis cluster failover redundancy-group 0 node 1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Initiated manual failover for redundancy group 0
Release Information
Command introduced in Junos OS Release 9.0.