refresh (JET)
Syntax
refresh;
Hierarchy Level
[edit system extensions extension-service application file filename]
Description
Overwrite the local copy of all enabled commit scripts or a single enabled commit
script with the copy located at the source URL, as specified in the
source
statement at the same hierarchy level. If the
load-scripts-from-flash
statement is configured, the device refreshes the scripts on the flash
drive instead of the hard disk.
The update operation occurs as soon as you issue the set refresh
configuration mode command. Issuing the set refresh command does
not add the refresh statement to the configuration. Thus the
command behaves like an operational mode command by executing an operation, instead
of adding a statement to the configuration.
Before you refresh a local script from an HTTPS server, you must first configure the
cert-file statement for that script in supported releases.
Specify the absolute path to the certificate (Root CA or self-signed) that the
device will use to validate the server's certificate during the refresh
operation.
On the QFabric system, commit scripts are stored in the /pbdata/mgd_shared/partition-ip/var/db/scripts/commit/ directory on the Director device.
As of Junos OS Release 18.1R1, you can specify which routing instance the update is done through. To specify the routing instance to use for updating commit scripts, configure the routing instance in two places in the CLI:
user@host# set system routing-instances routing-instance-name description description user@host# set system extensions extension-service application file filename routing-instance routing-instance-name
If you enable the non-default managment instance and use mgmt_junos
for routing-instance-name, you can configure
scripts to update using the dedicated management instance mgmt_junos.
Required Privilege Level
maintenance—To execute this statement in configuration mode.
Release Information
Statement introduced in Junos OS Release 18.1R1.