clear synchronous-ethernet wait-to-restore
Syntax
clear synchronous-ethernet wait-to-restore <interface interface-name>
Description
Clear the wait-to-restore timer for all the interfaces in an MX Series router.
When you perform GRES on MX Series routers, you must execute the clear
synchronous-ethernet wait-to-restore operational mode command on
the new primary Routing Engine to clear the wait-to-restore timer on it. This is
because the clear synchronous-ethernet wait-to-restore
operational mode command clears the wait-to-restore timer only on the local
Routing Engine.
Options
| interface interface-name | (Optional) Clear wait to restore timer for the specified interface. |
Required Privilege Level
clear
Sample Output
clear synchronous-ethernet wait-to-restore interface <interface-name>
The following example displays the message after the clear
synchronous-ethernet wait-to-restore interface ge-2/1/6 command
is entered in operational mode command:
user@host> clear synchronous-ethernet wait-to-restore interface ge-2/1/6 Cleared wait-to-restore timer for interface ge-2/1/6
Release Information
Command introduced in Junos OS Release 14.2.