spring-te-lsp-next-hop
Syntax
spring-te-lsp-next-hop{
<nexthop>
lsp-source {
bgp;
dtm;
pcep;
static;
}
}
Hierarchy Level
[edit logical-systems name routing-options static route destination], [edit logical-systems name routing-options rib rib name static route destination] [edit routing-options static route destination], [edit routing-options rib rib name static route destination]
Description
The configuration allows you to resolve static route over SR-TE tunnels.
Options
nexthop—Name of the SR-TE tunnel to reach destination address.
lsp-source—Source of tunnel creation and the following source types are currently supported. If the source is not configured, by default, it takes the next hop as static. So you must configure the source type if LSP is dtm, bgp, or pcep.
-
bgp
-
dtm
-
pcep
-
static
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 21.2R1.