show security gtp handover-group
Syntax
show security gtp handover-group
Description
Use this command to display the handover-group of the GTP profile. A GPRS tunneling protocol (GTP) handover group is a set of SGSNs or serving gateway (SGW) with a common address-book library. An administrator can configure a GTP profile and associate an GTP handover group to the GTP profile. When a GTP handover group name is referenced by a GTP profile, the device checks to see if the current SGSN/SGW address and the proposed SGSN/SGW address are both contained within the same GTP handover group. If both SGSN/SGW addresses are contained within the same GTP handover group, then the handover is allowed. If both the current and proposed SGSN/SGW addresses are not within the same GTP handover group, then the profile for the default handover group is used.
Required Privilege Level
view
Sample Output
show security gtp handover-group
user@host> show security gtp handover-group
All configured handover group:
Group name Address book name Address set name
handover_group_v1v2 addr_book_h roam_group_v1v2
hg_v1_h addr_book_h roam_v1_h
Release Information
Command introduced in Junos OS Release 17.4R1.