show chassis redundant-power-system

Syntax

Description

Display information about the Redundant Power Systems (RPS) connected to the switch.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show chassis redundant-power-system command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis redundant-power-system Output Fields
Field Name	Field Description	Level of Output
Member	Member number of the switch connected to the RPS—For a switch that has never been configured in a Virtual Chassis, the value is always zero. For a Virtual Chassis member, the range is zero through the maximum number of members in the Virtual Chassis.	All levels
Status	Status of the RPS: ARMED—The switch is ready to get backup power from the RPS if power supply fails on the switch. OFF—The switch has zero and is not configured to receive backup power from the RPS. BACKED-UP—The switch is receiving power backup from the RPS. OVER-SUBSCRIBED—The switch cannot receive backup power from the RPS even if you set the .	All levels
RPS	Serial number of the RPS.
Port	Number of the switch connector on the RPS that is connected to a switch.	All levels

Sample Output

show chassis redundant-power-system (Standalone Switch)
show chassis redundant-power-system (Virtual Chassis member)

show chassis redundant-power-system (Standalone Switch)

show chassis redundant-power-system (Virtual Chassis member)

Release Information

Command introduced in Junos OS Release 12.1.

ON THIS PAGE