show network-access gx-plus
Syntax
show network-access gx-plus<state | statistics | sync-state>
Description
Display Gx-Plus provisioning state, synchronization state, and statistics information.
Options
| state | (Optional) Display Gx-Plus provisioning state. |
| statistics | (Optional) Display Gx-Plus statistics. |
| sync-state | (Optional) Display Gx-Plus synchronization state. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show network-access gx-plus command. Output fields are listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
State of the Gx-Plus application, including the following:
|
|
Type of synchronization event. |
|
Number of times notification sent without response. |
|
Number and state of general events. |
|
Number and state of synchronization events. |
|
Events or errors that occur in jdiameterd on behalf of Gx-Plus. |
|
Errors encountered when the Gx-Plus component in authd is processing outbound requests. |
|
Events or errors that occur with the Gx-Plus component of authd. |
|
Events for requests that originated from jdiameterd and are intended for the Diameter layer on a PCRF server. |
|
Event that takes place after a cold boot (system reboot). |
|
Event that takes place after an authd or jdiameterd process restart. |
|
Event that takes place after a discovery request from the router. |
|
Event that takes place after an “Are You There” check. The check is triggered when the connection breaks between Diameter peers. It is the same as an AWD, except it is sent from the router side rather than the server side. |
|
Event that takes place after an application watchdog flag. The AWD is triggered when the connections breaks between Diameter peers. It is the same as an AYT, except it is sent from the server side rather than the router side. |
|
Events that take place as a result of the CCR-I provisioning request. |
|
Events that take place as a result of the CCR-T logout request. |
|
Events that take place as a result of the CCR-U rule report request. |
|
Events that take place as a result of the CCR-U threshold request. |
|
Events that cannot be attributed to a specific type of request. |
|
Events that take place as a result requests for an audit of a specific subscriber session; includes information about state and services. |
|
Events that take place as a result of discovery exchange for Gx-Plus. The request originates from the PCRF server for a specific subscriber. |
|
Events that take place as a result of discovery requests for all active Gx-Plus subscribers. The request originates on the PCRF server. |
|
Events that take place when the discovery exchange is completed. |
Sample Output
- show network-access gx-plus state
- show network-access gx-plus statistics
- show network-access gx-plus sync-state
- show network-access gx-plus statistics extensive (Extensive)
show network-access gx-plus state
user@host> show network-access gx-plus state Gx-plus state: Engine created : yes Partition configured : yes Configuration active : yes Diameter interface configured : yes Total number of entries : 0 Number of pending entries : 0 Number of pending logouts : 0
show network-access gx-plus statistics
user@host> show network-access gx-plus statistics Gx-plus general counters: Counter Value engine created 1 initial config: active 1 recovery: process restart 1 diameter-app initial config: success 1 Gx-plus sync-event counters: Category Counter Value warm-boot activated 1 warm-boot posted 1 warm-boot response 1 awd posted 12 awd response 12
show network-access gx-plus sync-state
user@host> show network-access gx-plus sync-state Gx-plus sync-events: Sync-Event Timeout cold-boot 6100
show network-access gx-plus statistics extensive (Extensive)
user@host> show network-access gx-plus statistics extensive Gx-plus general counters: Counter Value engine created 0 engine created after recovery 0 engine destruction started 0 engine destroyed 0 diameter-app config: failed 0 initial config: active 0 initial config: inactive 0 config changed: inactive to active 0 config changed: active to inactive 0 config changed: active to active 0 config changed: inactive to inactive 0 recovery: cold-boot 0 recovery: re-failover 0 recovery: process restart 0 diameter-app initial config: failure 0 diameter-app initial config: success 0 diameter-app config retry: failure 0 diameter-app config retry: success 0 response when no active config 0 bad response 0 response: unknown session 0 request when on no origins 0 request when no config: response queue full 0 request when no config: no memory 0 request when no config: bad request 0 request when no config: response build failure 0 request when no config: response sent 0 request when no config: response post failure 0 bad request 0 diameter tx 124986 diameter rx 7231 diameter event 1253 retrieving pending provisioning request 0 retrieving pending rule-report 0 retrieving pending rule-report 0 missed rule report request 0 tick 1213965 Gx-plus sync-event counters: Sync-Event Counter Value cold-boot activated 0 cold-boot re-activated 0 cold-boot duplicate activation 0 cold-boot activated to queue 0 cold-boot message build failure 0 cold-boot posted 0 cold-boot post failure 0 cold-boot response 0 warm-boot activated 0 warm-boot re-activated 0 warm-boot duplicate activation 0 warm-boot activated to queue 0 warm-boot message build failure 0 warm-boot posted 0 warm-boot post failure 0 warm-boot response 0 d-req activated 0 d-req re-activated 0 d-req duplicate activation 0 d-req activated to queue 0 d-req message build failure 0 d-req posted 0 d-req post failure 0 d-req response 0 ayt activated 5 ayt re-activated 0 ayt duplicate activation 37 ayt activated to queue 0 ayt message build failure 0 ayt posted 0 ayt post failure 0 ayt response 0 awd activated 0 awd re-activated 0 awd duplicate activation 0 awd activated to queue 0 awd message build failure 0 awd posted 0 awd post failure 0 awd response 0 Gx-plus sync-event diameter-events: Category Counter Value cold-boot bad flags 0 cold-boot bad fixed destination 0 cold-boot bad routed destination 0 cold-boot tx is over limit 0 cold-boot bad end-to-end id 0 cold-boot no peer for tx 0 cold-boot peer down while waiting for answer 0 cold-boot timeout while waiting for answer 0 cold-boot tx timeout 0 cold-boot tx try limit 0 cold-boot tx failure 0 cold-boot discarded 0 cold-boot received answer is over limit 0 cold-boot tx failure: no memory 0 cold-boot base-app-tx-timeout 0 cold-boot base-app-rx-timeout 0 cold-boot base-app-tx-discard 0 cold-boot base-app-rx-discard 0 warm-boot bad flags 0 warm-boot bad fixed destination 0 warm-boot bad routed destination 0 warm-boot tx is over limit 0 warm-boot bad end-to-end id 0 warm-boot no peer for tx 0 warm-boot peer down while waiting for answer 0 warm-boot timeout while waiting for answer 0 warm-boot tx timeout 0 warm-boot tx try limit 0 warm-boot tx failure 0 warm-boot discarded 0 warm-boot received answer is over limit 0 warm-boot tx failure: no memory 0 warm-boot base-app-tx-timeout 0 warm-boot base-app-rx-timeout 0 warm-boot base-app-tx-discard 0 warm-boot base-app-rx-discard 0 d-req bad flags 0 d-req bad fixed destination 0 d-req bad routed destination 0 d-req tx is over limit 0 d-req bad end-to-end id 0 d-req no peer for tx 0 d-req peer down while waiting for answer 0 d-req timeout while waiting for answer 0 d-req tx timeout 0 d-req tx try limit 0 d-req tx failure 0 d-req discarded 0 d-req received answer is over limit 0 d-req tx failure: no memory 0 d-req base-app-tx-timeout 0 d-req base-app-rx-timeout 0 d-req base-app-tx-discard 0 d-req base-app-rx-discard 0 ayt bad flags 0 ayt bad fixed destination 0 ayt bad routed destination 0 ayt tx is over limit 0 ayt bad end-to-end id 0 ayt no peer for tx 1248 ayt peer down while waiting for answer 0 ayt timeout while waiting for answer 0 ayt tx timeout 0 ayt tx try limit 0 ayt tx failure 0 ayt discarded 0 ayt received answer is over limit 0 ayt tx failure: no memory 0 ayt base-app-tx-timeout 0 ayt base-app-rx-timeout 0 ayt base-app-tx-discard 0 ayt base-app-rx-discard 2 awd bad flags 0 awd bad fixed destination 0 awd bad routed destination 0 awd tx is over limit 0 awd bad end-to-end id 0 awd no peer for tx 42 awd peer down while waiting for answer 0 awd timeout while waiting for answer 0 awd tx timeout 0 awd tx try limit 0 awd tx failure 0 awd discarded 0 awd received answer is over limit 0 awd tx failure: no memory 0 awd base-app-tx-timeout 0 awd base-app-rx-timeout 0 awd base-app-tx-discard 0 awd base-app-rx-discard 0 Gx-plus upstream counters: Category Counter Value prov start 6 prov start: failure: bad data 0 prov start: ignore 0 prov start: failure: in recovery 0 prov start: failure: spruious 0 prov start: prov canceled 0 prov start: threshold canceled 0 prov start: rule-report canceled 0 prov start: rule-report posted to CCR-T 0 prov start: no proc required 0 prov start: success + logout dropped 0 prov start: failure + logout dropped 0 prov start: success: no-config 0 prov start: failure: no-config 0 prov start: success: over active limit 0 prov start: failure: over active limit 0 prov start: success: pending 0 prov start: failure: duplicate 0 prov start: success: no-memory 0 prov start: failure: no-memory 0 prov start: success: message posted 0 prov start: success: message to ready-queue 0 prov start: async: message posted 4 prov start: async: message to ready queue 2 prov message posted from ready queue 2 prov response: late response 0 prov response: positive 6 prov response: negative 0 prov response: bad data 0 prov response timeout 2 prov timeout: message already in ready queue 12 prov timeout: message posted 0 prov timeout: message to ready queue 0 prov active refill: message posted 0 prov active refill: message to ready queue 0 prov message build failure 0 prov post failure 0 prov implied post 5 prov discard 0 prov discard(no effect) 0 prov implied response 0 prov not supported 0 prov element allocated 6 prov element freed 6 logout start 6 logout start: failure: bad data 0 logout start: ignore 0 logout start: failure: in recovery 0 logout start: failure: spruious 0 logout start: prov canceled 0 logout start: threshold canceled 0 logout start: rule-report canceled 0 logout start: rule-report posted to CCR-T 0 logout start: no proc required 0 logout start: success + logout dropped 0 logout start: failure + logout dropped 0 logout start: success: no-config 0 logout start: failure: no-config 0 logout start: success: over active limit 0 logout start: failure: over active limit 0 logout start: success: pending 0 logout start: failure: duplicate 0 logout start: success: no-memory 0 logout start: failure: no-memory 0 logout start: success: message posted 4 logout start: success: message to ready-queue 2 logout start: async: message posted 0 logout start: async: message to ready queue 0 logout message posted from ready queue 2 logout response: late response 0 logout response: positive 6 logout response: negative 0 logout response: bad data 0 logout response timeout 0 logout timeout: message already in ready queue 12 logout timeout: message posted 0 logout timeout: message to ready queue 0 logout active refill: message posted 0 logout active refill: message to ready queue 0 logout message build failure 0 logout post failure 0 logout implied post 0 logout discard 0 logout discard(no effect) 0 logout implied response 0 logout not supported 0 logout element allocated 6 logout element freed 6 ruleReport start 12 ruleReport start: failure: bad data 0 ruleReport start: ignore 0 ruleReport start: failure: in recovery 0 ruleReport start: failure: spruious 0 ruleReport start: prov canceled 0 ruleReport start: threshold canceled 0 ruleReport start: rule-report canceled 0 ruleReport start: rule-report posted to CCR-T 6 ruleReport start: no proc required 0 ruleReport start: success + logout dropped 0 ruleReport start: failure + logout dropped 0 ruleReport start: success: no-config 0 ruleReport start: failure: no-config 0 ruleReport start: success: over active limit 0 ruleReport start: failure: over active limit 0 ruleReport start: success: pending 0 ruleReport start: failure: duplicate 0 ruleReport start: success: no-memory 0 ruleReport start: failure: no-memory 0 ruleReport start: success: message posted 6 ruleReport start: success: message to ready-queue 0 ruleReport start: async: message posted 0 ruleReport start: async: message to ready queue 0 ruleReport message posted from ready queue 0 ruleReport response: late response 0 ruleReport response: positive 6 ruleReport response: negative 0 ruleReport response: bad data 0 ruleReport response timeout 0 ruleReport timeout: message already in ready queue 0 ruleReport timeout: message posted 0 ruleReport timeout: message to ready queue 0 ruleReport active refill: message posted 0 ruleReport active refill: message to ready queue 0 ruleReport message build failure 0 ruleReport post failure 0 ruleReport implied post 0 ruleReport discard 0 ruleReport discard(no effect) 0 ruleReport implied response 0 ruleReport not supported 0 ruleReport element allocated 6 ruleReport element freed 6 threshold start 113 threshold start: failure: bad data 0 threshold start: ignore 0 threshold start: failure: in recovery 0 threshold start: failure: spruious 0 threshold start: prov canceled 0 threshold start: threshold canceled 0 threshold start: rule-report canceled 0 threshold start: rule-report posted to CCR-T 0 threshold start: no proc required 0 threshold start: success + logout dropped 0 threshold start: failure + logout dropped 0 threshold start: success: no-config 0 threshold start: failure: no-config 0 threshold start: success: over active limit 0 threshold start: failure: over active limit 0 threshold start: success: pending 0 threshold start: failure: duplicate 0 threshold start: success: no-memory 0 threshold start: failure: no-memory 0 threshold start: success: message posted 92 threshold start: success: message to ready-queue 21 threshold start: async: message posted 0 threshold start: async: message to ready queue 0 threshold message posted from ready queue 0 threshold response: late response 0 threshold response: positive 92 threshold response: negative 0 threshold response: bad data 0 threshold response timeout 21 threshold timeout: message already in ready queue 0 threshold timeout: message posted 0 threshold timeout: message to ready queue 0 threshold active refill: message posted 0 threshold active refill: message to ready queue 0 threshold message build failure 0 threshold post failure 0 threshold implied post 0 threshold discard 0 threshold discard(no effect) 0 threshold implied response 0 threshold not supported 0 threshold element allocated 113 threshold element freed 113 general start 0 general start: failure: bad data 0 general start: ignore 0 general start: failure: in recovery 0 general start: failure: spruious 0 general start: prov canceled 0 general start: threshold canceled 0 general start: rule-report canceled 0 general start: rule-report posted to CCR-T 0 general start: no proc required 0 general start: success + logout dropped 0 general start: failure + logout dropped 0 general start: success: no-config 0 general start: failure: no-config 0 general start: success: over active limit 0 general start: failure: over active limit 0 general start: success: pending 0 general start: failure: duplicate 0 general start: success: no-memory 0 general start: failure: no-memory 0 general start: success: message posted 0 general start: success: message to ready-queue 0 general start: async: message posted 0 general start: async: message to ready queue 0 general message posted from ready queue 0 general response: late response 0 general response: positive 0 general response: negative 0 general response: bad data 0 general response timeout 0 general timeout: message already in ready queue 0 general timeout: message posted 0 general timeout: message to ready queue 0 general active refill: message posted 0 general active refill: message to ready queue 0 general message build failure 0 general post failure 0 general implied post 0 general discard 0 general discard(no effect) 0 general implied response 0 general not supported 0 general element allocated 0 general element freed 0 Gx-plus upstream diameter-events: Category Counter Value prov bad flags 0 prov bad fixed destination 0 prov bad routed destination 0 prov tx is over limit 0 prov bad end-to-end id 0 prov no peer for tx 0 prov peer down while waiting for answer 0 prov timeout while waiting for answer 0 prov tx timeout 0 prov tx try limit 0 prov tx failure 0 prov discarded 0 prov received answer is over limit 0 prov tx failure: no memory 0 prov base-app-tx-timeout 0 prov base-app-rx-timeout 0 prov base-app-tx-discard 0 prov base-app-rx-discard 0 logout bad flags 0 logout bad fixed destination 0 logout bad routed destination 0 logout tx is over limit 0 logout bad end-to-end id 0 logout no peer for tx 0 logout peer down while waiting for answer 0 logout timeout while waiting for answer 0 logout tx timeout 0 logout tx try limit 0 logout tx failure 0 logout discarded 0 logout received answer is over limit 0 logout tx failure: no memory 0 logout base-app-tx-timeout 0 logout base-app-rx-timeout 0 logout base-app-tx-discard 0 logout base-app-rx-discard 0 ruleReport bad flags 0 ruleReport bad fixed destination 0 ruleReport bad routed destination 0 ruleReport tx is over limit 0 ruleReport bad end-to-end id 0 ruleReport no peer for tx 0 ruleReport peer down while waiting for answer 0 ruleReport timeout while waiting for answer 0 ruleReport tx timeout 0 ruleReport tx try limit 0 ruleReport tx failure 0 ruleReport discarded 0 ruleReport received answer is over limit 0 ruleReport tx failure: no memory 0 ruleReport base-app-tx-timeout 0 ruleReport base-app-rx-timeout 0 ruleReport base-app-tx-discard 0 ruleReport base-app-rx-discard 0 threshold bad flags 0 threshold bad fixed destination 0 threshold bad routed destination 0 threshold tx is over limit 0 threshold bad end-to-end id 0 threshold no peer for tx 0 threshold peer down while waiting for answer 0 threshold timeout while waiting for answer 0 threshold tx timeout 0 threshold tx try limit 0 threshold tx failure 0 threshold discarded 0 threshold received answer is over limit 0 threshold tx failure: no memory 0 threshold base-app-tx-timeout 0 threshold base-app-rx-timeout 0 threshold base-app-tx-discard 0 threshold base-app-rx-discard 0 general bad flags 0 general bad fixed destination 0 general bad routed destination 0 general tx is over limit 0 general bad end-to-end id 0 general no peer for tx 0 general peer down while waiting for answer 0 general timeout while waiting for answer 0 general tx timeout 0 general tx try limit 0 general tx failure 0 general discarded 0 general received answer is over limit 0 general tx failure: no memory 0 general base-app-tx-timeout 0 general base-app-rx-timeout 0 general base-app-tx-discard 0 general base-app-rx-discard 0 Gx-plus downstream counters: Category Counter Value audit new request 0 audit retry request 0 audit queue full 0 audit no-memory 0 audit message posted 0 audit message build failure 0 audit post failure 0 d-exact new request 0 d-exact retry request 0 d-exact queue full 0 d-exact no-memory 0 d-exact message posted 0 d-exact message build failure 0 d-exact post failure 0 d-bulk new request 5 d-bulk retry request 0 d-bulk queue full 0 d-bulk no-memory 0 d-bulk message posted 5 d-bulk message build failure 0 d-bulk post failure 0 d-done new request 0 d-done retry request 0 d-done queue full 0 d-done no-memory 0 d-done message posted 0 d-done message build failure 0 d-done post failure 0
Release Information
Command introduced in Junos OS Release 11.2.