Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

fru-poweron-sequence

Syntax

Hierarchy Level

Description

(MX Series 5G Universal Routing Platforms, SRX5xxx Series Platforms) Configure the power-on sequence for the DPCs in the chassis for routers with the enhanced AC Power Entry Module (PEM).

(T640 routers, T1600 routers, T4000 routers, MX2020 routers, and PTX Series packet transport routers) Configure the power-on sequence for Flexible PIC Concentrators (FPCs) installed in the chassis.

Options

(MX Series 5G Universal Routing Platforms only) fru-poweron-sequence—Power-on sequence for the DPCs in the chassis. The numbers indicate the slot number of the DPCs.

Note:

If the power-on sequence is not configured by including the fru-poweron-sequence statement, Junos OS uses the /var/log/fpc_poweron_seq.log file to determine the power-on sequence for the last power-on operation for the DPCs and the same sequence is used. If the /var/log/boot_seq.log file, is not available, Junos OS uses the ascending order of the slot numbers of the DPCs as the sequence to power on the DPCs.

(T640 routers, T1600 routers, T4000 routers, MX2020 routers, and PTX Series packet transport routers) fru-poweron-sequence—Power-on sequence for the FPCs in the chassis. The numbers indicate the slot number of the FPCs.

Note:

  • If the configured sequence contains invalid numbers, Junos OS considers only the valid numbers in the sequence. The invalid numbers are silently discarded.

  • If the power-on sequence is not configured by including the fru-poweron-sequence statement, Junos OS uses the ascending order of the slot numbers of the FPCs as the sequence to power on the FPCs.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 10.0.

Related Documentation