show isis authentication
Syntax
show isis authentication <instance instance-name> <logical-system (all | logical-system-name)>
Syntax (EX Series Switches and QFX Series)
show isis authentication <instance instance-name>
Description
Display information about Intermediate System-to-Intermediate System (IS-IS) authentication.
Options
| none | Display information about IS-IS authentication. |
| instance instance-name | (Optional) Display IS-IS authentication for the specified routing instance. |
| logical-system (all | logical-system-name) | (Optional) Perform this operation on all logical systems or on a particular logical system. |
Required Privilege Level
view
Output Fields
Table 1 describes the output fields for the show isis authentication command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
|
Interface name. |
|
IS-IS level. |
|
IS-IS Hello (IIH) packet authentication type. Displays the name of the active keychain if hitless authentication key rollover is configured. |
|
Complete sequence number authentication type. |
|
Partial sequence number authentication type. |
|
Layer 1 link-state PDU authentication type. |
|
Layer 2 link-state PDU authentication type. |
Sample Output
- show isis authentication
- show isis authentication (With Hitless Authentication Key Rollover Configured)
show isis authentication
user@host> show isis authentication
Interface Level IIH Auth CSN Auth PSN Auth
at-2/3/0.0 1 Simple Simple Simple
2 MD5 MD5 MD5
L1 LSP Authentication: Simple
L2 LSP Authentication: MD5show isis authentication (With Hitless Authentication Key Rollover Configured)
user@host> show isis authentication Interface Level IIH Auth CSN Auth PSN Auth so-0/1/3.0 2 hakrhello MD5 MD5 L2 LSP Authentication: MD5
Release Information
Command introduced in Junos OS Release 7.5.
Support for hitless authentication key rollover introduced in Junos OS Release 11.2.