preempt-cutover-timer
Syntax
preempt-cutover-timer seconds;
Hierarchy Level
For platforms with ELS:
[edit switch-options redundant-trunk-group group name] [edit interfaces name aggregated-ether-options lacp link-protection rtg-config] [edit interfaces name aggregated-ether-options link-protection rtg-config]
For platforms without ELS:
[edit ethernet-switching-optionsredundant-trunk-group group name]
Description
Change the length of time that a re-enabled primary link waits to take over from an active secondary link in a redundant trunk group (RTG).
Default
If you do not change the time with the preempt-cutover-timer statement, a re-enabled primary link takes over from the active
secondary link after 1 second.
Options
seconds—Number
of seconds that the primary link waits to take over from the active
secondary link.
Range: 1 through 600 seconds
Required Privilege Level
admin—To view this statement in the configuration.admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.
Hierarchy level [edit switch-options] introduced
in Junos OS Release 13.2X50-D10 (ELS). (See Using the Enhanced Layer 2 Software CLI for information
about ELS.)