channel-speed
Syntax
channel-speed (10g | 25g | 50g | 100g | disable-auto-speed-detection) ;
Hierarchy Level
[edit chassis fpc slot-number pic pic-number (port port-number | port-range port-range-low port-range-high)]
Description
Enable the specified port on the Physical Interface Card (PIC) to perform in the specified channel speed. Additionally, you can disable auto-speed detection.
Default
The default speed of the platform is the maximum speed supported on the platform. Refer Port Settings for the supported speed details.
Options
10g—Set the channel speed to 10g (10-Gigabit Ethernet).
25g—Set the channel speed to 25g (25-Gigabit Ethernet).
50g—Set the channel speed to 50g (50-Gigabit Ethernet).
100g—Set the channel speed to 100g (100-Gigabit Ethernet).
disable-auto-speed-detection—Disable auto-speed detection.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 13.2.