Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show isis route

Syntax

Syntax (EX Series Switches and QFX Series)

Description

Display the routes in the IS-IS routing table.

Options

none

Display all routes in the IS-IS routing table for all supported address families for all routing instances.

destination

(Optional) Destination address for the route.

inet | inet6

(Optional) Display inet (IPv4) or inet6 (IPv6) routes, respectively.

instance instance-name

(Optional) Display routes for the specified routing instance only.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)

(Optional) Display routes for the specified topology only, or use unicast to display information, if available, for both IPv4 and IPv6 unicast topologies.

Required Privilege Level

view

Output Fields

Table 1 describes the output fields for the show isis route command. Output fields are listed in the approximate order in which they appear.

Table 1: show isis route Output Fields

Field Name

Field Description

Current version

Number of the current version of the IS-IS routing table.

L1

Version of Level 1 SPF that was run.

L2

Version of Level 2 SPF that was run.

Prefix or Label

Destination of the route.

L

IS-IS level:

  • 1—Level 1 only

  • 2—Level 2 only

  • 3—Level 1 and Level 2

Version

Version of SPF that generated the route.

Metric

Metric value associated with the route.

Type

Metric type: int (internal) or ext (external).

Interface

Interface to the next hop.

Via

System identifier of the next hop, displayed as a name if possible.

ISO Routes

ISO routing table entries.

snpa

MAC address.

Sample Output

show isis route logical-system

show isis route floodgroup

show isis route (CLNS)

show isis route

command-name

Release Information

Command introduced before Junos OS Release 7.4.