leaveall-timer (MVRP)
Syntax
leaveall-timer interval;
EX Series and QFX Series
SRX 1500, SRX 300, SRX 550M, SRX 345, SRX 340, SRX 320
[edit routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type), [edit routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type)
EX Series, M Series, SRX Series, T Series, MX Series
[edit logical-systems logical-system-name protocols mvrp], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type), [edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type), [edit logical-systems logical-system-name protocols mvrp interface (all | interface-name)], [edit protocols mvrp interface (all | interface-name)], [edit routing-instances routing-instance-name protocols mvrp] (for virtual switch instance type), [edit routing-instances routing-instance-name protocols mvrp interface (all | interface-name)] (for virtual switch instance type)
Description
For Multiple VLAN Registration Protocol (MVRP), configure the interval at which the LeaveAll state operates on the interface.
Maintain default timer settings unless there is a compelling reason to change the settings. Modifying timers to inappropriate values might cause an imbalance in the operation of MVRP. However, if you choose to change the default values, keep in mind that on an EX Series switch that uses Junos OS with support for ELS, if the timer value set on an interface level is different from the value set on a switch level, then the value on the interface level takes precedence.
Options
EX Series and QFX Series:
interval—Number of seconds or milliseconds between the sending of Leave All messages.
Default: 10 seconds, or 10,000 milliseconds
SRX 1500, SRX 300, SRX 550M, SRX 345, SRX 340, SRX 320:
seconds—Interval between
the sending of Leave All messages (range from 10 seconds through 60
seconds. Maintain default timer settings unless there is a compelling
reason to change the settings. Modifying timers to inappropriate values
might cause an imbalance in the operation of MVRP.
Default: 60 seconds
EX Series, M Series, SRX Series, T Series, MX Series:
milliseconds—Interval between the sending of Leave All messages. Maintain default timer settings unless there is a compelling reason to change the settings. Modifying timers to inappropriate values might cause an imbalance in the operation of MVRP.
Default: 10000 milliseconds
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.0.
Hierarchy level [edit protocols mvrp] introduced
in Junos OS Release 13.2X50-D10 (ELS). (See Using the Enhanced Layer 2 Software CLI for information
about ELS.)