no-split-detection (MX Series Virtual Chassis)
Syntax
no-split-detection;
Hierarchy Level
[edit virtual-chassis]
Description
As part of the preprovisioned configuration for
an MX Series Virtual Chassis, disable detection of a split in the
Virtual Chassis configuration. By default, split detection in the
Virtual Chassis is enabled. To maintain the Virtual Chassis configuration
in the event of a failure of one of the two member routers, we recommend
that you use the no-split-detection statement to disable
split detection in Virtual Chassis configurations in which you think
the backup router is more likely to fail than the link to the backup
router.
We recommend that you use the no-split-detection statement to disable split detection for a two-member MX Series
Virtual Chassis configuration if you think the backup router is more
likely to fail than the Virtual Chassis port links to the backup router.
Configuring redundant Virtual Chassis ports on different line cards
in each member router reduces the likelihood that all Virtual Chassis
port interfaces to the backup router can fail.
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.2.