link-tracking (Network Isolation Groups)
Syntax
link-tracking {
failure-type <link>;
interface name;
minimum-links count;
}Hierarchy Level
[edit protocols network-isolation group name detection]
Description
Track the link status of the configured interface or interfaces to detect network isolation conditions. You configure this statement when you define a network isolation group that you apply to a bridge domain, VLAN, or EVPN instance (EVI).
Options
| (Required) failure-type link |
Type of failure. The only supported failure type currently is
|
| interface {interface-name | [interface-name … ]} |
Track the interface state of the listed logical Layer 3 (L3) interfaces to detect network isolation conditions. Enclose multiple interface names in square brackets separated by spaces, or specify a single interface name without square brackets. |
| minimum-links count |
Minimum number of L2 links that must be up to indicate the device isn't
in a network isolation state. These are the L2 links associated with the L3
interfaces you specify with the
|
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS and Junos OS Evolved Release 23.1R1.