show link-management peer
Syntax
show link-management peer <name peer-name>
Description
Display Multiprotocol Label Switching (MPLS) peer link information.
Options
| none | Display all peer link information. |
| name peer-name | (Optional) Display information for the specified peer only. |
Required Privilege Level
view
Output Fields
Table 1 describes the output fields for the show link-management
peer command. Output fields are listed in the approximate order
in which they appear.
Field Name |
Field Description |
|---|---|
Peer Name |
Name of the peer. |
System identifier |
Internal identifier for the peer. The range of values is 0 through 64,000. |
State |
State of the peer: Up or Down. |
Control address |
Address to which a control channel is established. |
Hello interval |
How often the routing device sends Link Management Protocol (LMP) hello packets. |
Hello dead interval |
How long LMP waits before declaring the control channel to be dead. This is an interval during which the routing device receives no LMP hello packets from the neighbor on a control that is active or up. |
CC local ID |
Identifier assigned to the control channel by the local peer. The range of values is 1 through 4,294,967,296. |
CC remote ID |
Identifier assigned to the control channel by the remote peer. The range of values is 1 through 4,294,967,296. |
State |
State of the control channel: Up or Down. |
TxSeqNum |
Sequence number of the hello message being sent to the peer. The range of values is 1 through 4,294,967,295. |
RcvSeqNum |
Sequence number of the last hello message received from the peer. The range of values is 0 through 4,294,967,295. |
Flags |
Code that provides information about the control channel. Currently supports only code value R, which indicates that the control channel is restarting after a failure in the control plane, as when the Link Management Protocol (LMP) process starts or restarts. |
TE links |
Traffic-engineered links that are managed by their peer. |
Sample Output
show link-management peer
user@host> show link-management peer
Peer name: sonet, System identifier: 41448
State: Up, Control address: 70.70.70.70
Hello interval: 10000, Hello dead interval: 30000
CC local ID CC remote ID State TxSeqNum RcvSeqNum Flags
3265 0 ConfSnd 1 0 R
TE links:
to-sonet
Release Information
Command introduced before Junos OS Release 7.4.