show ptp clock

Number of the FPC or MIC slot.

Whether the clock provides time information which is a combination of an event message and a subsequent general message: True or False.

Clock identity of the timeReceiver or timeReceiver as defined in IEEE 1588.

Total number of PTP ports on the router.

Attribute of an ordinary or boundary clock that denotes the traceability of the time or frequency distributed by the grandmaster clock.

Indicates the expected accuracy of a clock when it is the grandmaster clock, or in the event it becomes the grandmaster.

Represents an estimate of the variations of the local clock when it is not synchronized via PTP to another clock.

Priority value of the clock. Lower value takes precedence.

Prioritize the primaries to avoid confusion when the Clock Priority1 value is the same for different primaries in a network.

Offset between International Atomic Time (TAI ) and Coordinated Universal Time (UTC) times. The value is 34 seconds as of January 2012.

When TRUE, the last minute of the current UTC day has only 59 seconds (instead of the 60 SI seconds).

When TRUE, the last minute of the current UTC day has 61 seconds (instead of the 60 SI seconds).

When TRUE, the timescale and the UTC offset are traceable to a timeTransmitter reference.

When TRUE, frequency determining the timescale is traceable to a timeTransmitter reference.

Time source external to the Precision Time Protocol (PTP), which provides time and/or frequency as appropriate. The time source is traceable to the international standards laboratories maintaining clocks that form the basis for the International Atomic Time (TAI) and Universal Coordinated Time (UTC) timescales. Examples of these are Global Positioning System (GPS), NTP, and National Institute of Standards and Technology (NIST) timeservers.

Interval in seconds between the delay-request messages sent by the timeReceiver to the timeTransmitter.

Number of boundary clocks between the local clock and the foreign timeTransmitter clock.

Set to TRUE, when the system is used in ordinary timeReceiver clock mode; otherwise, FALSE.

EUI-64 clock identifier of the immediate upstream timeTransmitter clock.

EUI-64 clock identifier of the grandmaster clock.

Denotes the grandmaster clock’s traceability of the distributed time or frequency.

Indicates the expected accuracy of the grandmaster clock.

Represents an estimate of the variations of the grandmaster clock.

Priority1-value of the grandmaster clock.

Priority2-value of the grandmaster clock.