udp-sweep
Syntax
udp-sweep {
threshold number;
}
Hierarchy Level
[edit security screen ids-option screen-name udp]
Description
Configure the device to detect and prevent UDP sweep attack. In a UDP sweep attack, an attacker sends UDP packets to the target device. If the device responds to those packets, the attacker gets an indication that a port in the target device is open, which makes the port vulnerable to attack. If a remote host sends UDP packets to 10 addresses in 0.005 seconds (5000 microseconds), then the device flags this as an UDP sweep attack.
If the alarm-without-drop option is not set, the
device rejects the eleventh and all further UDP packets from that
host for the remainder of the specified threshold period.
Options
threshold number—Maximum number of microseconds during which up to 10
UDP packets from the same host are allowed into the device. More than
10 requests from a host during this period triggers an UDP Sweep attack
response on the device during the remainder of the second.
Range: 1000 through 1,000,000 microseconds
Default: 5000 microseconds
Required Privilege Level
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.2.