ip-address (Port Mirroring)
Syntax
ip-address ip-address;
Hierarchy Level
[edit forwarding-options] analyzer name output] [edit forwarding-options port-mirroring [instance name] family ethernet-switching output interface name]
Description
Specify the IP address to which traffic should be mirrored (the IP address of the analyzer system). The device can be on a remote network. The analyzer device must be able to de-encapsulate GRE-encapsulated packets, or the GRE-encapsulated packets must be de-encapsulated before reaching the analyzer device. (You can use a network sniffer to de-encapsulate the packets.) This statement is not supported on QFabric systems.
An output IP address cannot be in the same subnetwork as any of the switch’s management interfaces.
If you create virtual routing instances and also create an analyzer configuration that includes an output IP address, the output address belongs to the default virtual routing instance (inet.0 routing table).
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.1X53.