close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

show security flow session destination-port

date_range 19-Nov-23

Syntax

content_copy zoom_out_map
         show security flow session destination-port       
                    destination-port-number [brief | extensive | summary]               

Description

Display information about each session that uses the specified destination port.

Options

destination-port-number—Number of the destination port for which to display sessions information.
Range: 1 through 65,535

brief | extensive | summary
Display the specified level of output.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show security flow session destination-port command. Output fields are listed in the approximate order in which they appear.

Table 1: show security flow session destination-port Output Fields
Field Name	Field Description
`Session ID`	Number that identifies the session. You can use this ID to get additional information about the session.
`Policy name`	Policy that permitted the traffic.
`Timeout`	Idle timeout after which the session expires.
`In`	Incoming flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes).
`Out`	Reverse flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes).
`Total sessions`	Total number of sessions.
`Status`	Session status.
`Flag`	Internal flag depicting the state of the session, used for debugging purposes.
`Policy name`	Name and ID of the policy that the first packet of the session matched.
`Source NAT pool`	The name of the source pool where NAT is used.
`Application`	Name of the application.
`Maximum timeout`	Maximum session timeout.
`Current timeout`	Remaining time for the session unless traffic exists in the session.
`Session State`	Session state.
`Start time`	Time when the session was created, offset from the system start time.
`Unicast-sessions`	Number of unicast sessions.
`Multicast-sessions`	Number of multicast sessions.
`Failed-sessions`	Number of failed sessions.
`Sessions-in-use`	Number of sessions in use. Valid sessions Pending sessions Invalidated sessions Sessions in other states
`Maximum-sessions`	Number of maximum sessions.

Sample Output

show security flow session destination-port 23
show security flow session destination-port 23 brief
show security flow session destination-port 23 extensive
show security flow session destination-port 23 summary

show security flow session destination-port 23

content_copy zoom_out_map
root> show security flow session destination-port 23
Flow Sessions on FPC10 PIC1:
Total sessions: 0

Flow Sessions on FPC10 PIC2:
Total sessions: 0

Flow Sessions on FPC10 PIC3:

Session ID: 430000098, Policy name: default-policy-00/2, Timeout: 1778, Valid
  In: 198.51.100.10/15190 --> 198.51.100.2/23;tcp, If: ge-7/1/0.0, Pkts: 109, Bytes: 5874, CP Session ID: 430000093
  Out: 198.51.100.2/23 --> 198.51.100.10/15190;tcp, If: ge-7/1/1.0, Pkts: 64, Bytes: 4015, CP Session ID: 430000093
Total sessions: 1

show security flow session destination-port 23 brief

content_copy zoom_out_map
root> show security flow session destination-port 23 brief 
Flow Sessions on FPC10 PIC1:
Total sessions: 0

Flow Sessions on FPC10 PIC2:
Total sessions: 0

Flow Sessions on FPC10 PIC3:

Session ID: 430000098, Policy name: default-policy-00/2, Timeout: 1778, Valid
  In: 198.51.100.10/15190 --> 198.51.100.2/23;tcp, If: ge-7/1/0.0, Pkts: 109, Bytes: 5874, CP Session ID: 430000093
  Out: 198.51.100.2/23 --> 198.51.100.10/15190;tcp, If: ge-7/1/1.0, Pkts: 64, Bytes: 4015, CP Session ID: 430000093
Total sessions: 1

show security flow session destination-port 23 extensive

content_copy zoom_out_map
root> show security flow session destination-port 23 extensive
Flow Sessions on FPC10 PIC1:
Total sessions: 0

Flow Sessions on FPC10 PIC2:
Total sessions: 0

Flow Sessions on FPC10 PIC3:

Session ID: 430000098, Status: Normal
Flags: 0x40/0x0/0x2008003
Policy name: default-policy-00/2
Source NAT pool: Null, Application: junos-telnet/10
Dynamic application: junos:UNKNOWN, 
Encryption:  Unknown
Application traffic control rule-set: INVALID, Rule: INVALID
Maximum timeout: 1800, Current timeout: 1630
Session State: Valid
Start time: 65490, Duration: 207
   In: 198.51.100.10/15190 --> 198.51.100.2/23;tcp 
    Interface: ge-7/1/0.0, 
    Session token: 0x6, Flag: 0xc0001021
    Route: 0xa0010, Gateway: 200.0.0.10, Tunnel: 0
    Port sequence: 0, FIN sequence: 0, 
    FIN state: 0, 
    Pkts: 109, Bytes: 5874
    CP Session ID: 430000093
   Out: 198.51.100.2/23 --> 2198.51.100.10/15190;tcp, 
    Interface: ge-7/1/1.0, 
    Session token: 0x7, Flag: 0xc0001020
    Route: 0x80010, Gateway: 60.0.0.2, Tunnel: 0
    Port sequence: 0, FIN sequence: 0, 
    FIN state: 0, 
    Pkts: 64, Bytes: 4015               
    CP Session ID: 430000093
Total sessions: 1

show security flow session destination-port 23 summary

content_copy zoom_out_map
root> show security flow session destination-port 23 summary
Flow Sessions on FPC10 PIC1:

Valid sessions: 0
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Total sessions: 0

Flow Sessions on FPC10 PIC2:

Valid sessions: 0
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Total sessions: 0

Flow Sessions on FPC10 PIC3:

Valid sessions: 1
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Total sessions: 1

Release Information

Command introduced in Junos OS Release 8.5; Filter and view options added in Junos OS Release 10.2.

arrow_backward PREVIOUS show security flow session brief node

NEXT arrow_forward show security flow session destination-prefix

Junos CLI Reference

ON THIS PAGE

show security flow session destination-port

Syntax

Description

Options

Required Privilege Level

Output Fields

Sample Output

show security flow session destination-port 23

show security flow session destination-port 23 brief

show security flow session destination-port 23 extensive

show security flow session destination-port 23 summary

Release Information

Stay in touch

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry

Junos CLI Reference

ON THIS PAGE

show security flow session destination-port

Syntax

Description

Options

Required Privilege Level

Output Fields

Sample Output

show security flow session destination-port 23

show security flow session destination-port 23 brief

show security flow session destination-port 23 extensive

show security flow session destination-port 23 summary

Release Information

Related Documentation

Stay in touch