show interfaces (Encryption)
Syntax
show interfaces es-fpc/pic/port:channel <brief | detail | extensive | terse> <descriptions> <media> <snmp-index snmp-index> <statistics>
Description
(M Series and T Series routers only) Display status information about the specified encryption interface.
Options
| es-fpc/pic/port:channel | Display standard status information about the specified encryption interface. |
| brief | detail | extensive | terse | (Optional) Display the specified level of output. |
| descriptions | (Optional) Display interface description strings. |
| media | (Optional) Display media-specific information about network interfaces. |
| snmp-index snmp-index | (Optional) Display information for the specified SNMP index of the interface. |
| statistics | (Optional) Display static interface statistics. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show interfaces (Encryption) command. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
| Physical Interface | ||
Physical interface |
Name of the physical interface. |
All levels |
Enabled |
State of the interface. Possible values are described in the “Enabled Field” section under Common Output Fields Description. |
All levels |
Interface index |
Physical interface's index number, which reflects its initialization sequence. |
detail extensive none |
SNMP ifIndex |
SNMP index number for the physical interface. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Type |
Encapsulation being used on the interface. |
All levels |
Link-level type |
Encapsulation being used on the physical interface. |
All levels |
MTU |
MTU size on the physical interface. |
All levels |
Speed |
Speed at which the interface is running. |
All levels |
Device flags |
Information about the physical device. Possible values are described in the “Link Flags” section under Common Output Fields Description. |
All levels |
Interface flags |
Information about the interface. Possible values are described in the “Interface Flags” section under Common Output Fields Description. |
All levels |
Input rate |
Input rate in bits per second (bps) and packets per second (pps). |
None specified |
Output rate |
Output rate in bps and pps. |
None specified |
Hold-times |
Current interface hold-time up and hold-time down, in milliseconds. |
detail extensive |
Statistics last cleared |
Time when the statistics for the interface were last set to zero. |
detail extensive |
Traffic statistics |
Number and rate of bytes and packets received and transmitted on the physical interface.
|
detail extensive |
Egress queues |
Total number of egress queues supported on the specified interface. |
detail extensive |
Queue counters |
CoS queue number and its associated user-configured forwarding class name.
|
detail extensive |
| Logical Interface | ||
Logical interface |
Name of the logical interface. |
All levels |
Index |
Logical interface index number, which reflects its initialization sequence. |
detail extensive none |
SNMP ifIndex |
Logical interface SNMP interface index number. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Flags |
Information about the logical interface. Possible values are described in the “Logical Interface Flags” section under Common Output Fields Description. |
All levels |
IP-Header |
IP header of the logical interface. |
All levels |
Encapsulation |
Encapsulation on the logical interface. |
All levels |
protocol-family |
Protocol family configured on the logical interface. If the protocol is inet, the IP address of the interface is also displayed. |
brief |
Input packets |
Number of packets received on the logical interface. |
None specified |
Output packets |
Number of packets transmitted on the logical interface. |
None specified |
Traffic statistics |
Total number of bytes and packets received and transmitted on the logical interface. These statistics are the sum of the local and transit statistics. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize. |
detail extensive |
Local statistics |
Statistics for traffic received from and transmitted to the Routing Engine. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize. |
detail extensive |
Transit statistics |
Statistics for traffic transiting the router. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize. |
detail extensive |
Protocol |
Protocol family configured on the logical interface, such as iso, inet6, mpls. |
detail extensive none |
MTU |
MTU size on the logical interface. |
detail extensive none |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Route table |
Routing table in which the logical interface address is located. For example, 0 refers to the routing table inet.0. |
detail extensive |
Flags |
Information about the protocol family flags. Possible values are described in the “Family Flags” section under Common Output Fields Description. |
detail extensive none |
Addresses, Flags |
Information about the address flags. Possible values are described in the “Addresses Flags” section under Common Output Fields Description.Address |
detail extensive none |
Destination |
IP address of the remote side of the connection. |
detail extensive none |
Local |
IP address of the logical interface. |
detail extensive none |
Broadcast |
Broadcast address of the logical interface. |
detail extensive |
Generation |
Unique number for use by Juniper Networks technical support only. |
detail extensive |
Sample Output
- show interfaces (Encryption)
- show interfaces brief (Encryption)
- show interfaces detail (Encryption)
- show interfaces extensive (Encryption)
show interfaces (Encryption)
user@host> show interfaces es-0/3/0
Physical interface: es-0/3/0, Enabled, Physical link is Up
Interface index: 138, SNMP ifIndex: 71
Type: IPSEC, Link-level type: IPSEC-over-IP, MTU: 3900, Speed: 800mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Logical interface es-0/3/0.0 (Index 70) (SNMP ifIndex 45)
Flags: Hardware-Down Point-To-Point SNMP-Traps
IP-Header 10.0.10.2:10.0.10.1::df:64:00000000 Encapsulation: IPSEC
Input packets : 0
Output packets: 0
Protocol inet, MTU: 3800
Flags: None
Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
Destination: 10.10.0.2, Local: 10.10.0.1
show interfaces brief (Encryption)
user@host> show interfaces es-0/3/0 brief
Physical interface: es-0/3/0, Enabled, Physical link is Up
Type: IPSEC, Link-level type: IPSEC-over-IP, MTU: 3900, Speed: 800mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Logical interface es-0/3/0.0
Flags: Hardware-Down Point-To-Point SNMP-Traps
IP-Header 10.0.10.2:10.0.10.1::df:64:00000000 Encapsulation: IPSEC
inet 10.10.0.1 --> 10.10.0.2s
show interfaces detail (Encryption)
user@host> show interfaces es-0/3/0 detail
Physical interface: es-0/3/0, Enabled, Physical link is Up
Interface index: 138, SNMP ifIndex: 71, Generation: 21
Type: IPSEC, Link-level type: IPSEC-over-IP, MTU: 3900, Speed: 800mbps
Hold-times : Up 0 ms, Down 0 ms
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Statistics last cleared: Never
Traffic statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Anti-replay failures : 0
Authentication failures : 0
Egress queues: 4 supported, 4 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 0 0 0
1 expedited-fo 0 0 0
2 assured-forw 0 0 0
3 network-cont 0 0 0
Logical interface es-0/3/0.0 (Index 70) (SNMP ifIndex 45) (Generation 9)
Flags: Hardware-Down Point-To-Point SNMP-Traps
IP-Header 10.0.10.2:10.0.10.1::df:64:00000000 Encapsulation: IPSEC
Traffic statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Local statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Transit statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Protocol inet, MTU: 3800, Generation: 22, Route table: 0
Flags: None
Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
Destination: 10.10.0.2, Local: 10.10.0.1, Broadcast: Unspecified,
Generation: 26
show interfaces extensive (Encryption)
user@host> show interfaces es-0/3/0 extensive
Physical interface: es-0/3/0, Enabled, Physical link is Up
Interface index: 138, SNMP ifIndex: 71, Generation: 21
Type: IPSEC, Link-level type: IPSEC-over-IP, MTU: 3900, Speed: 800mbps
Hold-times : Up 0 ms, Down 0 ms
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Statistics last cleared: Never
Traffic statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Anti-replay failures : 0
Authentication failures : 0
Egress queues: 4 supported, 4 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 0 0 0
1 expedited-fo 0 0 0
2 assured-forw 0 0 0
3 network-cont 0 0 0
Logical interface es-0/3/0.0 (Index 70) (SNMP ifIndex 45) (Generation 9)
Flags: Hardware-Down Point-To-Point SNMP-Traps
IP-Header 10.0.10.2:10.0.10.1::df:64:00000000 Encapsulation: IPSEC
Traffic statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Local statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Transit statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Protocol inet, MTU: 3800, Generation: 22, Route table: 0
Flags: None
Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
Destination: 10.10.0.2, Local: 10.10.0.1, Broadcast: Unspecified,
Generation: 26
Release Information
Command introduced before Junos OS Release 7.4.