Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show services mobile-edge sessions

Syntax

Description

This command gives information on mobile sessions active on the SAEGW-U/SGW-U/PGW-U/UPF.

Note:

The backup routing engine (RE) supports only the top level of the show services mobile-edge sessions summary command and not any of its sub-options.

Options

none

Display information on mobile sessions active on the SAEGW-U/SGW-U/PGW-U/UPF.

control-plane-peers

Display information on mobile sessions for a specific or all SAEGW-Cs/SGW-C/PGW-C/SMF.

detail

Display detailed information on mobile sessions or on a specific SAEGW-C/SGW-C/PGW-C/SMF.

extensive

Display extensive information on mobile sessions or by local SEID.

histogram

Display total established sessions in five minute and hourly intervals.

summary

Display summary information on mobile sessions active on the SAEGW-U/SGW-U/PGW-U/UPF.

access-network-peers

Display session summary output by access network peer.

core-network-peers

Display session summary output by core network peer.

anchor-group

Display session summary output by anchor group.

apns

Display session summary output by APN.

local-seid

Display session extensive output for a local SEID.

pic

Display session summary output by PIC.

slot

Display session summary output by FPC slot.

statistics

Display detailed session statistics.

transient-sessions Display detailed data for any transient sessions.

Required Privilege Level

view

Output Fields

Table 1 describes the output fields for the show services mobile-edge sessions command. Output fields are listed in the approximate order in which they appear.

Table 1: show services mobile-edge sessions Output Fields

Field Name

Field Description

Session-address

IP address of the session.

State

State of the session. ESTABLISHED or DELETING.

Num-bearers

Number of bearers for the session.

Num-QoS-Flows

Number of 5G QoS flows for the session.

VRF-ID

The ID number (in hexadecimal format) of the routing-instance that the mobile-edge session's APN is attached to.

APN

Access Point Name

CPF-peer

IP address of the control plane peer for the session.

Access-peer

IP address of the access peer (eNodeB) for the session.

Core-peer

IP address of the core network peer for the session.

Anchor-PFE

Anchor PFE for the session.

Secondary-anchor-PFE

Backup anchor PFE for the session.

Local-SEID

Local session ID (SEID) for the session.

Remote-SEID

Remote SEID for the session.

User ID

IE that can be present in a PFCP Session Establishment Request. This IE is useful for troubleshooting problems in the UPF affecting a subscriber.

Bearer EBI/NSAPI

EPS Bearer ID / Network Service Access Point Identifier.

Loc TEID

The local TEID allocated by the SAEGW-U for a given access peer.

Rem TEID

The remote TEID allocated for a given access peer. This is signaled over PFCP.

FAR-ID

Forwarding Action Rule ID.

Destination Interface

Destination Interface for a given FAR, either Access or Core.

PDR ID

Packet Detection Rule ID.

QER ID

QoS Enforcement Rule ID.

Uplink gate

Uplink QER gate status, either Open or Closed.

Downlink gate

Downlink QER gate status, either Open or Closed.

Uplink mbr

Uplink QER maximum bit rate before policing starts, in kbps.

Downlink mbr

Downlink QER maximum bit rate before policing starts, in kbps.

SDF Filter

Service data flow filter(s) for a given PDR. Flows matching these filters will be forwarded. All else are discarded.

Downlink Forwarding Class

Name of the downlink forwarding queue assigned to a given flow.

Sessions by State

The current number of sessions in state: ESTABLISHED, DELETING, and Total.

Bearers by State

The current number of bearers in state: BEARER_WAIT, ESTABLISHED, DELETING, and Total.

Bearers by Downlink FAR state

The current number of bearers by downlink FAR state. The allowable states are:

  • FORWARD– Downlink FAR apply action is set to Forward.

  • DROP – Downlink FAR apply action is set to Drop.

  • IDLE – Downlink FAR apply action is set to Notify Control Plane and/or Buffer, but the first packet has not been detected by the PFE.

  • BUFFER - Downlink FAR apply action is set to Notify Control Plane and/or Buffer, and the first packet has been detected by the PFE.

Bearers by Resource Type

The current number of bearers by the type of resource: guaranteed bit rate (GBR) or best effort (Non-GBR).

5QoS Flows by Resource Type

The current number of 5G QoS flows by the type of resource: guaranteed bit rate (GBR) or best effort (Non-GBR).

APFE PIC

The anchor PFE PIC.

Slot

The FPC slot.

Sample Output

show services mobile-edge sessions

show services mobile-edge sessions (with framed IPv6 Route)

show services mobile-edge sessions control-plane-peers

show services mobile-edge sessions detail

show services mobile-edge sessions detail (with framed IPv6 route)

show services mobile-edge sessions detail control-plane-peers

show services mobile-edge sessions detail transient-sessions

show services mobile-edge sessions extensive

show services mobile-edge sessions extensive (with framed IPv6 route)

show services mobile-edge sessions extensive transient-sessions

show services mobile-edge sessions histogram

show services mobile-edge sessions summary

show services mobile-edge sessions summary access-network-peers

show services mobile-edge sessions summary anchor-group

show services mobile-edge sessions summary apns

show services mobile-edge sessions summary control-plane-peers

show services mobile-edge sessions summary pic

show services mobile-edge sessions summary slot

show services mobile-edge session summary transient-sessions

Release Information

Command introduced in Junos OS 19.4R1.

core-network-peers option introduced in Junos OS 20.4R1.

Framed IPv6 Route options introduced in Junos OS 22.4R1.

transient-sessions and histogramoptions introduced in Junos OS 23.4R1.