Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

optimize-adaptive-teardown

Syntax

Hierarchy Level

Description

Uses RPD infrastructure to determine when all the routes using the old LSP instance have fully shifted to the new LSP instance after MBB switchover. When this statement is configured, the optimize-hold-dead-delay statement, which delays the teardown of the old LSP instance after MBB switchover, is ignored.

Options

p2p

Only point-to-point LSPs configured in the system will be affected.
delaydelay-value

Delays the tearing down of old optimized LSP paths based on the configured value.

  • Range: from 3 through 65535 seconds

  • Default: 10 seconds

Note: The delay CLI statement is introduced from Junos OS Release 17.2 onwards.
timeouttimeout

Timeout for adaptive teardown to clean up LSP

  • Range: from 1 through 65535 seconds

  • Default: 600 seconds

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 15.1R1.

Related Documentation