request chassis satellite interface
Syntax
request chassis satellite interface interface-name
device-mode satellite
Description
Change the device mode for a device.
This command is used to change a device into a satellite device for a Junos Fusion. After interconnecting a device to an aggregation device in a Junos Fusion, enter this command from the aggregation device to begin the manual satellite device conversion procedure.
Other configuration steps, such as configuring the cascade port and creating a satellite software upgrade group, must be completed before this command can be used to convert a device into a satellite device. See Configuring Junos Fusion Provider Edge or Configuring or Expanding a Junos Fusion Enterprise.
Options
| interface-name | Specify the name of the cascade port interface on the aggregation device that connects to the device that will be converted into a satellite device. |
Required Privilege Level
system-control
Sample Output
request chassis satellite interface xe-0/0/1 device-mode satellite
user@aggregation-device> request chassis satellite interface xe-0/0/1 device-mode satellite
Release Information
Command introduced in Junos OS Release 14.2R3.