gigether-options
Syntax
gigether-options {
802.3ad {
aex (primary | backup);
lacp {
port-priority;
}
}
(asynchronous-notification | no-asynchronous-notification);
(auto-negotiation | no-auto-negotiation) remote-fault <local-interface-online | local-interface-offline>;
fec (gigether)
(flow-control | no-flow-control);
ignore-l3-incompletes;
(loopback | no-loopback);
loopback-remote
mpls {
pop-all-labels {
required-depth number;
}
}
no-auto-mdix
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
speed
ethernet-switch-profile {
(mac-learn-enable | no-mac-learn-enable);
tag-protocol-id [ tpids ];
ethernet-policer-profile {
input-priority-map {
ieee802.1p premium [ values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
}
}
Hierarchy Level
[edit interfaces interface-name]
Description
Configure Gigabit Ethernet specific interface properties.
In Junos OS Evolved, when you configure set interfaces interface gigether-options 802.3ad ae name at the same time as you apply a second configuration to the same interface at the [edit interfaces interface] hierarchy, the second configuration will not take effect until the interface joins the aggregated Ethernet interface ae name.
Table 1 shows the supported and unsupported platforms.
Supported Platforms for gigether-options |
Supported Platforms for ether-options |
Notes |
|---|---|---|
ACX Series Routers (Junos OS)
|
ACX Series Routers (Junos OS)
|
To configure storm control on the ACX Series routers, use |
EX Series Switches (Junos OS)
|
EX Series Switches (Junos OS)
|
EX Series Switches (Junos OS) EX Series switches support both To configure Ethernet configuration options such as aggregated Ethernet, loopback, flow-control, auto-negotiation etc., use To configure Forward Error Correction (FEC), use |
MX Series Routers (Junos OS)
|
Not Supported |
None |
PTX Series Routers (Junos OS)
|
PTX Series Routers (Junos OS)
|
PTX Series Routers (Junos OS) In Junos OS Release 17.3R3S7, PTX1000 Series routers support both In Junos OS Releases 17.3R1, 17.4R1, and 17.4R2, PTX10000 Series routers support both In Junos OS Release 18.1R1 and later, PTX Series routers support only Note:
In Junos OS Release 19.4R2, PTX10002-60C supports |
PTX Series routers (Junos OS Evolved)
|
PTX Series routers (Junos OS Evolved)
|
PTX Series routers (Junos OS Evolved) Starting in Junos OS Evolved Release 20.1R1, PTX Series routers support Before Junos OS Evolved Release 20.1R1, PTX Series routers supported |
QFX Series Switches (Junos OS)
|
QFX Series Switches (Junos OS)
|
QFX Series Switches (Junos OS) QFX Series switches support both To configure Ethernet configuration options such as loopback, flow-control, auto-negotiation etc., use To configure Forward Error Correction (FEC), use |
Not Supported |
QFX Series Switches (Junos OS Evolved)
|
To configure auto-negotiation on management interfaces ( |
SRX Series (Junos OS)
|
SRX Series (Junos OS)
|
SRX Series (Junos OS) To configure gigabit-Ethernet interfaces (ge-), use |
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.