show services nat deterministic-nat internal-host
Syntax
show services nat deterministic-nat internal-host nat-address nat-port
Description
This commands prints the internal host address and algorithmically determined port ranges for the specified NAT IP address and port number. The results are calculated on the PIC and the results are sent to RE.
Options
| nat-address | NAT address of the internal host. |
| nat-port | NAT port of the internal host. |
Required Privilege Level
view
Output Fields
Table 1 lists
the output fields for the nat deterministic-nat internal-host command. Output fields
are listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of a service interface. |
|
Name of a service set. Individual empty service sets are not displayed, but if none of the service sets has any flows, a flow table header is printed for each service set. |
|
Private IP address of a subscriber on the access network. |
|
NAT public IP address |
|
Lowest port number in range of assigned ports. |
|
Highest port number in range of assigned ports. |
Sample Output
show services nat deterministic-nat internal-host
user@host> show services nat deterministic-nat internal-host 203.0.113.1 2000 Service set: ss1 Interface: sp-2/0/0 NAT pool: pool1 Internal Host: 192.0.2.4, NAT IP Address: 203.0.113.1, NAT Port Start: 1792, NAT Port End: 2047
Release Information
Command introduced in Junos OS Release 12.1.