close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

English

show agent sensors

date_range 19-Nov-23

arrow_backward

arrow_forward

Syntax

content_copy zoom_out_map
show agent sensors

Description

Display information about sensors configured for Junos Telemetry Interface.

Note:

Junos telemetry interface was introduced in Junos OS Release 15.1F3 on MX Series routers with interfaces configured on MPC1 through MPC6E and on PTX Series routers with interfaces configured on FPC3. Starting in Junos OS Release 15.1F5, Junos Telemetry Interface is also supported on MPC7E, MPC8E, and MPC9E on MX Series routers.

Starting with Junos OS Release 16.1R3, FPC1, FPC2, and dual Routing Engines on PTX Series routers are also supported.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show agent sensors command. Output fields are listed in the approximate order in which they appear.

Table 1: show agent sensors Output Fields
Field Name	Field Description
`Sensor Information`	Information about sensors configured to monitor system resources and stream data.
`Name`	Name of configured sensor. Note: Junos OS Evolved Release 19.1R1 and later does not show output for generated child sensors.
`Resource`	Resource string used to configure and identify the system resource enabled to monitor and stream data.
`Sensor-id`	Numerical identifier of the sensor.
`Server Information`	Information about servers configured to collect sensor data.
`Name`	Name of server.
`Scope-id`	Numerical identifier of a scope.
`Remote-Address`	Destination IP address for exported packets.
`Remote-port`	Destination port for exported packets.
`Profile information`	Information about export profiles for sensors.
`Name`	Name of export profile.
`Rep-interval`	Interval, in seconds, at which the sensor generates data to export.
`Address`	Source address of exported packets.
`Port`	Source port of exported packets.
`Format`	Format of exported data message: `GPB`
`DSCP`	Configured DSCP value for exported packets. Note: The default value is 0. This value is displayed if you do not configure a DSCP value. Note: This field is not included with gRPC-based streaming.
`Forwarding-class`	Configured forwarding class for exported packets. Note: The default value is 0. This value is displayed if you do not configure a forwarding class. Note: This field is not included with gRPC-based streaming.
`Loss-Priority`	Configured loss priority for packets streamed through UDP (MX Series only): `high`, `low`, `medium-high`, `medium-low` Note: This field is not included with gRPC-based streaming.

Sample Output

show agent sensors (DDOS sensor)
show agent sensors (firewall filter sensor)
show agent sensors (CPU memory sensor)
show agent sensors (packet forwarding engine statistics)
show agent sensors (QFX10008 or QFX10016 switches with Junos OS Release 17.3R1 and later)
show agent sensors (Junos OS Evolved Release 19.1R1 and later)