close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

English

rule-sets (CoS AppQoS)

date_range 19-Nov-23

arrow_backward

arrow_forward

Syntax

content_copy zoom_out_map
rule-sets {
    rule-set-name {
        rule rule-name {
            match {
                application application-name;
                application-any;
                application-group application-group-name;
                application-known;
                application-unknown;
            }
            then {
                dscp-code-point dscp-value ;
                forwarding-class forwarding-class-name;
                log;
                loss-priority [ high | medium-high | medium-low | low ];
                rate-limit {
                    loss-priority-high;
                    client-to-server rate-limiter-name;
                    server-to-client rate-limiter-name;
                }
            }
        }
    }
}

Hierarchy Level

content_copy zoom_out_map
[edit class-of-service application-traffic-control]
[edit logical-systems logical-system-name class-of-service application-traffic-control]
[edit tenants tenant-name class-of-service application-traffic-control]

Description

Defines AppQoS rule sets and the rules that establish priorities based on quality-of-service requirements for the associated applications. AppQoS rules can be included in policy statements to implement application-aware quality of service control.

Options

rule-set-name—Name used to refer to a collection of AppQoS rules.
rule rule-name—Name applied to the match criteria and resulting actions that control the quality-of-service provided to any matching applications.
application application-name—Name of the application to be used as match criteria for the rule.
application-any —Any application encountering this rule. Note that when you use this specification, all application matching ends. Any application rule following this one will never be encountered.
application-group application-group-name—Group of applications to be used as match criteria for the rule. Both applications and application groups can be match criteria for a single rule.
application-known—Match criteria specifying any session that is identified, but its corresponding application is not specified.
application-unknown—Match criteria specifying any session that is not identified.
forwarding-class forwarding-class-name—The AppQoS class with which matching applications will be marked. This field identifies the rewriter that has marked the DSCP value . Therefore, the AppQoS forwarding class must be different from those used by IDP or firewall filters. With this class specified, firewall filter class will not overwrite the existing DSCP value.
dscp-code-point—DSCP alias or bit map with which matching applications will be marked to establish the output queue. This value can be marked by rewriters from IDP, AppQoS, or a firewall filter. The forwarding-class value identifies which rewriter has re-marked the packet with the current DSCP value. If a packet triggers all three rewriters, IDP takes precedence over AppQoS, which takes precedence over a firewall filter.
loss-priority—Loss priority with which matching applications will be marked. This value is used to determine the likelihood that a packet would be dropped when encountering congestion. A high loss priority means that there is an 80% chance of packet loss in congestion. Possible values are high, medium-high, medium-low and low.
rate-limit—Rate limiters to be associated with client-to-server and with server-to-client traffic for this application. The rate limiter profile defines maximum speed and volume limits for matching applications.
log—AppQoS event logging.

Required Privilege Level

security—To view this statement in the configuration.

security-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 11.4.

Support at the following hierarchy levels introduced in Junos OS Release 19.3R1: [edit logical-systems logical-system-name class-of-service application-traffic-control], and [edit tenants tenant-name class-of-service application-traffic-control].

arrow_backward PREVIOUS rule-set (Softwires Next Gen Services)

NEXT arrow_forward rule-sets (Security Application Firewall)

Junos CLI Reference

ON THIS PAGE

rule-sets (CoS AppQoS)

Syntax

Hierarchy Level

Description

Options

Required Privilege Level

Release Information

Stay in touch

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry

Junos CLI Reference

ON THIS PAGE

rule-sets (CoS AppQoS)

Syntax

Hierarchy Level

Description

Options

Required Privilege Level

Release Information

Related Documentation

Stay in touch